Specific or complex project ahead? Get in touch for a free, fast quote.
Verplas 75mm Radial Ducting Cutter Tool | VR75-CUTTER | MVHR
Regular price
£9.95
Inc. VAT
£8.29
Exc. VAT
FREE Express Delivery (1-3 days) in UK Mainland on most orders*
Excluding: Solar Panels (£170 delivery / free above £2,500), Batteries (£39 delivery), Small Items (£4.95/5.95 delivery / free above £500)
Contact Us to check for Next Working Day Delivery or Same-day Delivery options
Contact Us for Click & Collect options
Custom quote available on request
*See checkout or shipping policy for full details
Payment options
Tools & Kits
Build your kit
Need a full system?
Design your complete solution in minutes with our kit builders.
Do you have a question
about this product?
One of our expert advisors will be happy to help you!
Contact Us
The Verplas 75mm Radial Ducting Cutter (product code VR75-CUTTER) is the purpose-made cutting tool for Verplas 75 mm radial ducting. It is designed to cut 75 mm radial duct smoothly and with ease, so you can trim each run to length on site and get clean ends ready for connectors, bends, plenums and manifold boxes.
Radial ducting is the MVHR distribution method in which individual 75 mm ducts run from a manifold to each room, and the small diameter lets installers thread the ducting through the building fabric. Because every run is cut to length, a tool made for the job helps keep the work quick, tidy and repeatable, whether you are doing one dwelling or a whole new-build site.
It belongs to the Verplas Radial Ducting range: a fully SAP-tested 75 mm system with internally anti-bacterial ducting, designed for seamless installation in Mechanical Ventilation Heat Recovery projects. Verplas has been a UK ventilation manufacturer since 1986 and is BS EN ISO 9001 approved.
75 mm
Radial duct size
VR75-CUTTER
Product code
MVHR
Heat recovery ducting
SAP tested
Verplas radial system
Since 1986
Verplas UK manufacturer
ISO 9001
Manufacturer approval
Safety
This is a cutting tool. Keep fingers and free hands clear of the cutting edge, cut away from your body, hold or support the duct firmly, and wear suitable gloves and eye protection. Check the area behind and around the duct for cables and pipework before cutting in a built-up location, and store the tool safely out of reach of children.
Compatibility
Designed for 75 mm radial ducting in the Verplas radial range. It is not intended for other duct diameters or for rigid, rectangular or round ducting. If you plan to use it on another make of 75 mm radial duct, test on an offcut first to confirm it cuts cleanly.
Tip for good joints
Make each cut square to the duct, remove any debris or loose material from the end, then push the duct fully into the fitting. The Verplas 75 mm connectors and bends are supplied with locking clips and two sealing rings, so a clean end helps the seals seat properly.
Key features
Made for 75 mm radial duct
Sized for 75 mm radial ducting, so you are not improvising with a general-purpose blade or saw.
Smooth cutting
Designed to cut the duct smoothly with ease, giving a tidy end that is ready to connect.
Cut-to-length workflow
Radial runs are cut to suit each room, so a dedicated cutter speeds up repeat cuts across a whole installation.
Cleaner joints
A clean, square cut helps push-fit connectors, sealing rings and locking clips engage properly for a good airtight fit.
Part of a complete system
Works alongside the Verplas radial range: ducting rolls, connectors, 90° bends, plenums, clamps, end caps and 6, 10 and 14 port manifold boxes.
Verplas quality
From a UK ventilation manufacturer with BS EN ISO 9001 approval and over 35 years in the industry.
Specification
Using the cutter in a radial MVHR installation
Plan the run from the manifold box to each plenum, measure and mark the duct, then cut square with the Verplas cutter. Fit the duct into the connector, bend or plenum, engage the locking clips and check that the sealing rings sit correctly. The small 75 mm diameter makes it straightforward to route runs through joists, voids and service zones, and clean cuts keep the airtight performance of each joint as designed.
Frequently asked questions
BTU & WATT Calculator
Room Dimensions
Room Type
Living Room
Bedroom
Kitchen
Bathroom
Conservatory
Hallway
Glazing Type
Single Glazed
Double Glazed
Triple Glazed
External Walls
0 Wall
1 Wall
2 Walls
3 Walls
4 Walls
Insulation Level
Poor
Average
Good (New Build)
Required Heating
0
Watts
0
BTUs
Tools & Kits
Build your kit
Need a full system?
Design your complete solution in minutes with our kit builders.
Do you have a question
about this product?
One of our expert advisors will be happy to help you!
Contact Us