Telford Tempest Pre Plumbed 200L Cylinder 50L Buffer For Samsung Heat Pump

The Telford 200L/50L Pre‑Plumbed Cylinder for Samsung (TSMI200/50/HP/PP/SAM) is a 200L Tempest unvented stainless‑steel heat pump cylinder with an integrated 50L buffer, factory pre‑plumbed and pre‑wired to deliver a fast, neat installation with Samsung air source heat pumps.

Key Features

• Pre‑plumbed Tempest cylinder – duplex stainless‑steel unvented cylinder with press‑fit pre‑fabricated 28mm pipework and pre‑wiring, designed to minimise installation time and reduce on‑site errors.
• Integrated 50L buffer – built‑in 50L buffer vessel increases system volume and stabilises flow for improved heat pump cycling and defrost performance.
• Heat pump optimised coil – purpose‑designed large surface‑area coil to maximise heat transfer from a low‑temperature heat pump into the stored water, supporting high system efficiency.
• Mains‑pressure hot water – unvented design provides high‑flow, mains‑pressure domestic hot water suitable for modern bathrooms and multiple outlets.
• Compact storage volume – 200L DHW capacity with 50L buffer makes this model well suited to smaller homes or properties with limited plant‑room space.

Pre‑Installed Components

• Samsung control box and wired controller – MIM‑E03EN – Samsung mono controller and room interface pre‑mounted and pre‑wired for direct integration with compatible Samsung heat pumps.
• Midsummer 3‑port diverter valve (pre‑wired) – factory‑wired 3‑port diverter valve to manage DHW and space‑heating priority without additional wiring centres.
• Secondary circulation Grundfos pump (7.5m head) – pre‑installed circulation pump on the secondary circuit to ensure correct flow through cylinder and heating system.
• Integrated 50L buffer – internal buffer store incorporated into the cylinder assembly, removing the need for a separate buffer vessel.
• Filling loop and pressure gauge – fitted filling kit and pressure gauge simplify initial filling, commissioning and routine pressure checks.
• Safety and inlet components – 15–22mm tundish, temperature and pressure (T&P) relief valve, 22mm inlet group valve and automatic air vent are factory‑fitted for compliance and safety.

Other Included Accessories

• Samsung flow sensor – supplied flow sensor for correct monitoring and control by the Samsung heat pump controls.
• Potable expansion vessel – separate expansion vessel provided to manage domestic hot‑water expansion, typically complete with bracket for wall mounting.

Compatibility & Applications

• Compatible heat pumps: pre‑configured specifically for Samsung air source heat pumps that use the MIM‑E03EN mono control platform; not compatible with Samsung integrated heat pumps which include their own cylinder package.
• System type: indirect, unvented mains‑pressure hot‑water cylinder with integrated buffer, designed for use with a Samsung ASHP as the primary heat source.
• Ideal use cases: smaller dwellings or lower‑demand properties where a 200L cylinder and 50L buffer provide sufficient hot‑water storage and hydraulic stability in a compact footprint.

Construction, Warranty & Notes

• Construction: Duplex stainless‑steel inner vessel with high‑performance insulation and robust external steel case for durability and low standing heat losses.
• Warranty: lifetime manufacturing warranty on the inner container and 2‑year warranty on components, subject to Telford terms and correct installation.
• Registration: the cylinder must be registered with Telford via the online registration portal after commissioning to activate the full warranty cover.