Sigenergy EV AC Charger 22kW 4G 5m Tethered Type 2 White | Three Phase Smart EVSE

The Sigenergy EV AC Charger 22 kW is a three-phase smart EVSE with a tethered 5m Type 2 cable, designed for residential and commercial EV charging with deep integration into the Sigenergy ecosystem. At 22 kW across three phases (approximately 32A per phase at 230V), it charges compatible EVs at up to 3× the speed of a standard single-phase 7.4 kW charger. Built-in 4G connectivity makes it independent of site Wi-Fi — useful for commercial sites, remote locations, or garages where wireless coverage is unreliable. The unit integrates directly with Sigenergy inverters to offer three distinct charging modes: 100% solar, solar boost (solar plus grid top-up), and fast charging. Dynamic Load Management (DLM) automatically adjusts charge rate to prevent household supply overload, switching between three-phase and single-phase modes as required. Integrated PEN protection and residual current detection comply with IET-01:2024 and Section 722 of BS 7671:2018+A2:2022 — eliminating the need for a separate external PEN device.

• 22 kW three-phase output — up to 3× faster than a standard 7.4 kW single-phase charger
• Tethered 5m Type 2 cable — ready to use, compatible with all Type 2 EVs and PHEVs
• Built-in 4G — no site Wi-Fi dependency; remote monitoring and firmware updates over mobile network
• 100% Solar mode — charges EV from PV surplus only (requires Sigenergy inverter)
• Solar Boost mode — uses solar surplus topped up by grid or battery for faster solar charging
• Fast Charging mode — draws from solar, battery, and grid simultaneously for maximum speed
• Dynamic Load Management — auto-adjusts charge rate; switches 3-phase/1-phase to prevent overload
• Integrated PEN breaker — UK-specific; complies with IET-01:2024 and BS 7671:2018+A2:2022
• Integrated residual current protection — no external RCD device required, reducing install cost
• OCPP 1.6J ED 2 — compatible with commercial charge point management platforms and RFID cards
• IP65 rated — suitable for outdoor wall mounting in UK weather
• Top or bottom cable entry — flexible installation on any wall orientation
• Click-in mounting — installs in ~15 minutes, commissioning in ~5 minutes
• mySigen App — scheduled charging, off-peak tariff automation, energy usage tracking
• Works with third-party inverters — advanced modes (priority adjustment) require Sigenergy inverter