Mixergy Solar X 2.0 Direct Slimline 475mm Cylinder | Embedded PV Diverter Electric Cylinder 120-210L

Description

The Mixergy Solar X Direct Slimline is a stainless steel unvented cylinder for electric-only properties, with a factory-fitted embedded PV diverter built into a narrower 475mm case for restricted cylinder cupboards and loft hatches.

Spanning 120 to 210 litres across four SKUs, this model shares the same 2.0 Controller, embedded diverter modulating between 30W and 3000W, and stratified thermocline smart charging as the standard-case Solar X Direct.

120–210L

Capacity Range

475mm

Diameter

Embedded

PV Diverter

30W–3000W

Modulation Range

80°C

Diverter Cut-Out

WiFi

App Connected

Please Note: Current Lead Times

Mixergy cylinders typically ship on a 3 to 6 week lead time, depending on model and quantity ordered. Please call us to check current availability before confirming an installation date.

Good to Know: Solar Surplus, Automatically Used

The embedded diverter continuously modulates output between 30W and 3000W, matching the immersion load to whatever solar surplus is available at any given moment.

Important: Unvented Installation Requirement

This is an unvented cylinder. Installation must be carried out by a G3-competent operative and commissioned per the manufacturer's Installation & Servicing instructions. Incoming mains pressure must be less than 10 bar and at least 1 bar, with a minimum flow rate of 10 L/min. Unvented cylinders must never be used with a solid fuel heat source.

Slimline 475mm Case

Purpose-built for restricted cylinder cupboards or loft hatches, trading additional height for a narrower footprint versus the 550mm standard case.

Factory-Fitted PV Diverter

The diverter ships embedded and pre-wired at the factory, cutting installation time and eliminating a separate wall-mounted diverter unit.

Wide Modulation Range

The diverter modulates smoothly across 30W to 3000W, so even small amounts of solar surplus are captured and used rather than exported at zero return.

Stratified Smart Charging

Thermocline sensors mean the controller only heats the volume of water required, so solar-diverted energy is used efficiently rather than reheating a full tank.

Full App Control & Monitoring

The bundled WiFi dongle connects to the Mixergy app, giving visibility of how much solar energy has been diverted alongside remote boost and monitoring.

Safety-Certified Components

Factory-fitted monobloc cold water inlet control group, T&P relief valve (7 bar/90°C), and expansion vessel charged to 3 bar.

Embedded Solar Diverter

Thermostat cut-out temperature	80°C
Immersion heater(s) rating	230–240V~, 2.7–3.0kW
Immersion heater(s) specification	EN 60335-2-73
Immersion heater(s) type	356mm Incoloy/Ti
Modulation range	30W–3000W

Controller & Electrical

Controller generation	2.0 Controller
Electrical supply	16A, dedicated MCB-protected circuit
Adjustable temperature range (digital)	50–65°C
Connectivity	WiFi dongle (supplied) or hardwired Ethernet

Unvented Safety Components

Max. supply pressure to PRV	10 bar
Operating pressure	3 bar
Expansion vessel charge pressure	3 bar
Expansion relief valve setting	6 bar
T&P relief valve setting (pressure)	7 bar
T&P relief valve setting (temperature)	90°C

Construction

Cylinder material	Stainless steel
Insulation type	CFC/HCFC-free polyurethane foam
Insulation thickness	50mm
Connection size/type	22mm compression

Model Range

Model Code	Capacity	ErP	Height	Weight Full*	Std. Heat Loss	Min Reheat
MX-120-ELE-475-PVE	120L	B	1247mm	143kg	1.25 kWh/24h	32 mins
MX-150-ELE-475-PVE	150L	B	1518mm	173kg	1.42 kWh/24h	32 mins
MX-180-ELE-475-PVE	180L	B	1790mm	208.4kg	1.51 kWh/24h	32 mins
MX-210-ELE-475-PVE	210L	B	1962mm	231.4kg	1.58 kWh/24h	32 mins

How does the embedded PV diverter work?

The diverter senses surplus solar generation and diverts it into the immersion heater, modulating output smoothly between 30W and 3000W to match available surplus.

What is the difference between the slimline and standard case?

Both share the same controller and diverter. The slimline case is 475mm diameter but taller at equivalent capacity; the standard case is 550mm diameter.

What does the weight full* figure account for?

Add 5kg to the full cylinder weight shown for cylinders fitted with an external heat exchanger.

What certification does the installer need?

Installation must be carried out by a competent operative who has completed a recognised unvented hot water systems course, with commissioning recorded per Building Regulations (G3) requirements.

What is included in the box?

Each cylinder ships with the monobloc cold water inlet control group, expansion vessel with mounting bracket, factory-fitted immersion heater(s), WiFi dongle, Ethernet cable, gauge, and user guide.

How long is the lead time and how do I check stock?

Lead times typically run 3 to 6 weeks depending on model and order quantity. Please call us to confirm current stock and expected delivery before booking an installation.

BTU Calculator

BTU & WATT Calculator

Room Dimensions

Length (in m):

Width (in m):

Height (in m):

Room Type

Living Room

Bedroom

Kitchen

Bathroom

Conservatory

Hallway

Glazing Type

Single Glazed

Double Glazed

Triple Glazed

External Walls

0 Wall

1 Wall

2 Walls

3 Walls

4 Walls

Insulation Level

Poor

Average

Good (New Build)

Calculate

Required Heating

0

Watts

0

BTUs