GSE Micro Inverter Fixing Screw - GSE on Roof System - ART101060

Description

The GSE Micro-Inverter Fixing Screw is the dedicated fastener used to attach a micro-inverter or power optimiser directly to the mounting rail of a GSE On Roof or GSE Ground System frame, using the slotted fixing holes built into the rail.

GSE frames include slotted mounting holes specifically for this purpose, allowing micro-inverters and optimisers to be positioned and secured at the point in the array that suits the cable run, without additional brackets or drilling into the rail.

GSE On Roof

System

Slotted Rail

Fixing Method

Micro-Inverters

Application

Optimisers

Also Compatible

No Drilling

Installation

Steel

Rail Material

Please Note

Always check the micro-inverter or optimiser manufacturer's installation manual before fitting, to confirm mounting orientation, torque and any manufacturer-specific bracket requirements. GSE specifies compatibility with all micro-inverters and optimisers on the market via the rail's slotted fixing holes, but individual device manufacturers may have their own mounting recommendations.

Purpose-Built for GSE Rails

Sized and threaded to engage the slotted fixing holes on GSE On Roof and Ground System mounting rails.

Wide Device Compatibility

GSE's mounting rail is designed to be compatible with all micro-inverters and optimisers on the market.

Flexible Positioning

The slotted hole pattern allows the fixing point to be adjusted along the rail, so the inverter can sit close to the relevant module string.

No Extra Drilling

Uses the rail's existing slots, avoiding the need to drill through the frame to fit inverter mounting brackets.

Straightforward Access for Servicing

Because the screw fixes into an open slot rather than a blind hole, inverters can be repositioned or removed for servicing without damaging the rail.

Suits Roof and Ground Installations

Used on both the GSE On Roof rail system and the GSE Ground System, wherever the slotted rail profile is present.

Product Details

Product Type

Fixing screw for micro-inverter / optimiser mounting

System

GSE On Roof System

Fixing Location

Slotted mounting holes in the GSE rail

Compatibility

Compatible Devices

Micro-inverters and power optimisers (all major brands, per GSE)

Also Used With

GSE Ground System rail (same slotted fixing principle)

Installation Note

Confirm inverter manufacturer's own mounting guidance before fitting

What is this screw used for?

It fixes a micro-inverter or power optimiser to the slotted mounting rail of a GSE On Roof or GSE Ground System installation.

Will this fit any micro-inverter brand?

The GSE rail's slotted fixing holes are designed to be compatible with micro-inverters and optimisers from any manufacturer. Always check the inverter's own installation manual for mounting specifics.

Do I need to drill the rail to fit an inverter?

No. The screw engages the pre-formed slotted holes already present in the GSE rail, so no additional drilling is required.

Can the inverter position be adjusted after installation?

Yes. Because the fixing uses a slotted channel rather than a single fixed hole, the inverter can be slid along the rail and repositioned as needed.

Is this the same fixing used on the GSE Ground System?

Yes, the GSE Ground System rail uses the same slotted fixing principle for mounting micro-inverters and optimisers.

BTU Calculator

BTU & WATT Calculator

Room Dimensions

Length (in m):

Width (in m):

Height (in m):

Room Type

Living Room

Bedroom

Kitchen

Bathroom

Conservatory

Hallway

Glazing Type

Single Glazed

Double Glazed

Triple Glazed

External Walls

0 Wall

1 Wall

2 Walls

3 Walls

4 Walls

Insulation Level

Poor

Average

Good (New Build)

Calculate

Required Heating

0

Watts

0

BTUs