The Casavent SRD-EC-75 is a PVC end cap sized to fit 75mm connection spigots on both semi-rigid radial ducting and EPP plenum or manifold boxes. It is used to seal unused spigots on a distribution box, or to cap the open end of a duct during construction to keep dust and debris out of the bore before final connection.
As a simple push-fit accessory, it requires no tools to install and can be removed just as easily when a spigot or duct end is ready to be connected.
75mm
Spigot / Duct Fit
PVC
Material
Push-Fit
Fitting Type
2
Use Cases: Cap or Plug
System Component
This end cap is a small accessory component used alongside 75mm Casavent semi-rigid ducting, plenum boxes, and manifolds — it does not include the duct, plenum, or manifold itself.
Dual Application
The same cap works as an unused-spigot blank on a plenum or manifold box, and as a duct end protector during installation, reducing the number of different parts an installer needs to carry.
Keeps Debris Out
Fitted over the open end of a duct during construction, the cap prevents dust, plaster, and other site debris from entering the bore before the duct is connected to its final fitting.
Seals Unused Spigots
On a manifold or plenum box with more spigots than are needed for a given room layout, the cap closes off the unused connection points to maintain system air-tightness.
Simple Push-Fit
No tools, adhesives, or fixings are needed — the cap is pushed on and pulled off by hand, making it quick to fit and remove as installation progresses.
PVC Construction
Made from PVC, the cap is lightweight, corrosion-free, and durable enough for repeated use across a project.
Matches 75mm Spigot Diameter
Sized to fit the 75mm connection spigots used throughout the Casavent 75mm radial duct, plenum, and manifold range.
Product Overview
Brand
Casavent
Product Code
SRD-EC-75
Description
End Cap for 75mm Semi-Rigid Ducting and EPP Plenum/Manifold Spigots
Fitting Type
Push-fit
Technical Data
Material
PVC (polyvinyl chloride)
Compatible With
Casavent semi-rigid radial ducting and EPP plenum/manifold connection spigots
Nominal Spigot/Duct Fit
75mm
What is this end cap used for?
It caps unused 75mm spigots on a plenum or manifold box, or protects the open end of a 75mm duct from debris during installation.
Does it need tools to fit?
No, it is a simple push-fit accessory that can be pushed on and removed by hand.
What is it made from?
PVC, giving a lightweight, corrosion-free, and durable cap.
Can I reuse the cap once removed?
Yes, as a push-fit component it can be removed and refitted as needed during the course of an installation.
BTU & WATT Calculator
Room Dimensions
Room Type
Living Room
Bedroom
Kitchen
Bathroom
Conservatory
Hallway
Glazing Type
Single Glazed
Double Glazed
Triple Glazed
External Walls
0 Wall
1 Wall
2 Walls
3 Walls
4 Walls
Insulation Level
Poor
Average
Good (New Build)
Required Heating
0
Watts
0
BTUs
Tools & Kits
Need a full system?
Design your complete solution in minutes with our kit builders.