The Elterm Armada is a high-capacity three-phase electric heating boiler built for large properties, plant rooms and commercial boiler rooms. Each unit delivers 30 to 48 kW, and units can be linked into cascades from 60 kW up to 2 MW, making it a practical way to scale output as demand grows. Every unit is made to order with a lead time of 1 to 2 weeks.
It is designed to work alongside high-capacity heat pumps as a backup or supplementary heat source, or to serve as the primary heat source in high-capacity boiler rooms. The powder-coated carbon steel heating body (stainless steel available on request) uses screw-in heating elements of 6.9 kW and 12 kW for simple replacement, and the boiler runs on both open and closed heating systems.
Control is handled by an advanced LCD automation panel with an integrated weekly central heating programmer, PV-ready capability, smartphone management and support for room and weather radio control. Modbus RTU comes as standard, with optional web application, 0-10 V analogue signal and Smart Home integration.
30-48 kW
Output per boiler
2 MW
Maximum cascade output
5-95°C
Operating temperature
0.5-2.5 bar
Working pressure
Made to order: lead time 1 to 2 weeks
Every Armada boiler is made to order to your chosen output and options, with a lead time of 1 to 2 weeks. Please allow for this when planning your installation programme.
Electrical installation and safety
The Armada is a three-phase appliance and must be installed by a competent electrician or qualified heating engineer in line with BS 7671 and the manufacturer's instructions. The exact power cable cross-section must be determined by the electrician after assessing local conditions. The boiler includes a resettable thermal cutout with a manual reset button, a separate thermal switch that activates the pump, and a safety valve as standard.
Compatibility and options to plan for
Smart Home integration requires the Modbus RTU protocol and the TECH Sinum EH-01 control unit. The optional DN32 central heating pump is available only as a set with the Armada boiler, so specify it at the time of ordering. The 3 bar safety valve can be upgraded to 6 bar as an option, and the manufacturer notes the LED or LCD control panel specification may be modified at any time.
Designed for cascade installations
Dedicated accessories are available to build a complete boiler room: a distribution manifold, low loss header, magnetic filters and a basket strainer, plus an optional structural mounting frame. The manufacturer also produces compact connecting manifolds and boiler mounting frames made to individual specifications.
Key features
Cascade-ready
Built with increased capacity to make cascades straightforward, from a single 30 to 48 kW unit up to 2 MW of combined output.
Replaceable heating elements
Screw-in 6.9 kW and 12 kW elements make servicing and replacement simple, and the heating body includes an integral drain valve.
Advanced LCD automation
An integrated weekly central heating programmer, an external thermostat or regulator relay (0 V) input and wired weather and room regulation are all included.
PV-ready
Equipped with PV-ready capabilities, so the boiler can be driven by surplus solar generation as a primary or supplementary heat source.
Open or closed systems
Works in both open and closed heating systems, with a DN15 automatic air vent, a 3 bar safety valve (6 bar optional) and a 125 A switch disconnector built in.
Remote and smart control
Smartphone management, room and weather radio control, optional web application monitoring and optional Smart Home integration over Modbus RTU.
Included and optional extras
Included as standard
LCD advanced automation panel
Relay (0 V) for an external thermostat or regulator
Wired weather and room regulation
Modbus RTU communication protocol
Available as options
Smart Home integration (needs Modbus RTU and TECH Sinum EH-01)
DN32 central heating pump (supplied only as a set with the boiler)
Web application for monitoring and remote temperature adjustment
Analogue signal 0-10 V
Domestic hot water connection set
Mounting frame, manifold, low loss header, magnetic filters and basket strainer
Sizing guide
The manufacturer's selection table links heated floor area to boiler capacity by building insulation level. As a guide, a standard building with 10-15 cm of insulation (around 70 W/m²) needs roughly 30 kW for 400 m², 36 kW for 500 m² and 42 kW for 600 m². A well-insulated building with 20-25 cm of insulation (around 40 W/m²) needs roughly 30 kW for 700 m², 36 kW for 800 m² and 42 kW for 1000 m². An energy-intensive building with 0-5 cm of insulation (around 120 W/m²) needs roughly 30 kW for 250 m², 36 kW for 300 m² and 48 kW for 400 m².
Indicative values only
These figures are a selection guide, not a heat loss calculation. Always size the boiler from a room-by-room heat loss assessment before specifying.
Technical specifications
General
Manufacturer
Elterm (Polish manufacturer)
Product
Armada electric heating boiler
Single boiler power
30 to 48 kW
Cascade power
60 kW to 2 MW
Heating body
Powder-coated carbon steel (stainless steel on request)
Heating elements
Screw-in, 6.9 kW and 12 kW, simple replacement
Energy efficiency rating
D
Availability
Made to order, lead time 1 to 2 weeks
Operating parameters
Operating temperature
5 - 95°C
Working pressure
0.5 to 2.5 bar
System type
Open and closed heating systems
Equipment and safety
Safety valve
3 bar (6 bar optional)
Drain valve
Within the boiler body
Isolator
125 A switch disconnector
Thermal protection
Resettable thermal cutout with pushbutton that disconnects power to the controller until reset, plus a thermal switch without button that activates the pump
Pressure protection
Pressure trigger
Control panel
Interchangeable LED or LCD panel
Controls and connectivity
Programmer
Integrated weekly central heating programmer
External control
Relay (0 V) for external thermostat or regulator
Weather and room control
Wired weather and room regulation; radio room and weather control
Communication
Modbus RTU (included)
Smartphone management
Yes
Optional connectivity
Web application, Smart Home (TECH Sinum EH-01 required), analogue 0-10 V signal
Dimensions and weight
Width x height x depth
350 x 950 x 280 mm
Output variants and electrical protection
Output
Supply
Fuse protection
Supply cable
30 kW
3 phases
Specified by electrician
Specified by electrician
36 kW
3 phases
3 x 63 A
5 x 16 mm²
42 kW
3 phases
3 x 80 A
5 x 25 mm²
48 kW
3 phases
3 x 80 A
5 x 25 mm²
Fuse and cable values are manufacturer guide figures. The precise cable cross-section is determined by an electrician following an assessment of local conditions.
Frequently asked questions
Can the Armada work with a heat pump?
Yes. It is designed to collaborate with high-capacity heat pumps as a supplementary or backup source, and it can equally act as the primary heat source in high-capacity boiler rooms.
Can several Armada boilers be cascaded?
Yes. Single boilers deliver 30 to 48 kW and cascades run from 60 kW up to 2 MW. Dedicated manifolds, a low loss header, magnetic filters, a basket strainer and a mounting frame are available to support a cascade installation.
Does it run on open and closed heating systems?
Yes. The boiler can operate in both open and closed systems, with working pressure of 0.5 to 2.5 bar and an operating temperature range of 5 to 95°C.
What electrical supply does it need?
The Armada is a three-phase boiler. For guidance, the 36 kW unit uses 3 x 63 A fuses with a 5 x 16 mm² cable, and the 42 kW and 48 kW units use 3 x 80 A fuses with a 5 x 25 mm² cable. Protection and cable size for every unit must be confirmed by an electrician after assessing local conditions.
How can I control it remotely or connect it to a smart home?
The boiler supports smartphone management and Modbus RTU as standard. An optional web application adds monitoring of all temperatures, remote temperature adjustment and a temperature graph. Smart Home integration needs Modbus RTU and the TECH Sinum EH-01 control unit.
Is the Armada kept in stock, and what is the lead time?
No. Each Armada is made to order with a lead time of 1 to 2 weeks, so your chosen output and options are built to specification.
Can I add a domestic hot water supply or a circulation pump?
Yes. A domestic hot water set can be connected as an option, and an optional DN32 central heating pump is available. The pump is supplied only as a set with the Armada boiler, so it should be specified when ordering.