The Eleven Energy 2m Battery Parallel Cable Set is the long battery-to-battery link you need when your Eleven Energy Volta sodium-ion batteries are installed across separate battery enclosures. Built from 35mm² battery cable and measuring 2 metres in length, it bridges the gap between cabinets where the short in-enclosure links cannot reach.
The set is supplied with connectors included so you can make up the battery cables on site. One end of each cable is crimped on site using a die suited to 35mm² cable, giving installers control over the final termination and routing. Use one pair for 3 or 4 batteries and two pairs for 5 or 6 batteries, scaling up as the system grows.
1 pair
For 3 to 4 batteries
2 per
Batteries per enclosure
Up to 8
Volta packs per system
Crimping required: one end of each cable must be crimped on site. You will need a crimping die for 35mm² cable, which is not included.
Compatibility: intended for linking Eleven Energy Volta ELB-4.5 sodium-ion batteries housed in separate Eleven battery enclosures. Confirm your system layout before ordering.
Safety: high-current DC battery wiring must only be installed by a competent, suitably qualified installer. Isolate the system before working on battery connections and follow the Eleven Energy installation instructions.
How many do I need? One pair for 3 or 4 batteries, two pairs for 5 or 6 batteries, and so on as you add enclosures.
Key Features
Enclosure-to-enclosure reach
A 2m cable length links batteries in separate Eleven battery enclosures.
35mm² battery cable
Heavy-duty 35mm² conductors suited to the DC currents of a parallel battery bank.
Connectors included
Supplied with connectors to make up the battery cables on site.
On-site termination
One end is crimped on site, so the finished connection suits your installation.
Made for Volta
Part of the Eleven Energy Volta cable range for 4.5 kWh sodium-ion batteries.
Scales with your system
One pair for 3 to 4 batteries, two pairs for 5 to 6, and so on.
Specification
Product
Product
2m Battery Parallel Cable Set (Volta Cables)
Application
Battery-to-battery parallel link between separate battery enclosures
Cable
Connectors
Supplied with the cable set
Termination
One end requires crimping on site
Tool required
Crimping die for 35 mm² cable (not supplied)
Compatibility and Quantity
Compatible battery
Eleven Energy Volta ELB-4.5, 4.5 kWh sodium-ion
3 or 4 batteries
1 pair required
5 or 6 batteries
2 pairs required
Frequently Asked Questions
When do I need the 2m parallel cable set?
You need it when your Volta batteries are installed in separate Eleven battery enclosures. Each enclosure holds two batteries, so a system with three or more batteries spans more than one enclosure and needs these longer links between them.
How many sets do I need?
You need one pair for 3 or 4 batteries and two pairs for 5 or 6 batteries, continuing in the same pattern as you add enclosures.
Are the cables ready to connect straight out of the box?
No. The set comes with connectors, but one end of each cable must be crimped on site. You will need a crimping die for 35mm² cable.
Which batteries is this cable set for?
It is part of the Eleven Energy Volta cable range, intended for linking Volta ELB-4.5 sodium-ion batteries housed in separate Eleven battery enclosures.
Who should fit these cables?
Battery DC wiring carries high current, so it should be carried out by a competent, suitably qualified installer following the Eleven Energy installation instructions.