Eco-Versal PIR Insulation Board 2400 x 1200mm | 25-150mm

Description

The EcoTherm Eco-Versal is a fibre free rigid PIR insulation board with aluminium foil composite facings on both sides, a 5 in 1 solution for floors, pitched roofs, cold flat roofs, timber frame walls, solid walls, dormer cheeks and ceilings. With a thermal conductivity of 0.022 W/mK it delivers high performance in minimal thickness.

For floors it is laid above the damp proof membrane under screed, including underfloor heating screeds, with a typical compressive strength of 140 kPa and a uniformly distributed load capacity of 30 kN/m². Each 2400 x 1200mm board covers 2.88 m² and is available in 10 thicknesses from 25mm to 150mm.

2400 x 1200mm

Board size

25 to 150mm

Thicknesses

0.022 W/mK

Thermal conductivity

140 kPa

Compressive strength

2.88 m²

Coverage per board

Foil faced

Both sides

Above the damp proof membrane, with a protective layer under screed

Eco-Versal must be used above the DPM and must not contact moisture from the ground. Where a concrete slab exists or is specified, overlay the boards with a protective membrane of minimum 500 gauge before applying the screed. It should not be used to isolate dampness or in continuously damp conditions.

Follow your underfloor heating manufacturer's guidance

Lay boards closely butted with staggered joints and allow for the screed depth your UFH system requires. Use a detailed U-value calculation for each project, as floor U-values depend on the exposed perimeter to area ratio. Confirm the board thickness with your heating designer.

Foil joints and handling

Self adhesive foil tape on board joints completes the vapour control layer. Cut with a sharp knife or fine tooth saw, wear eye and hand protection, and keep boards flat, dry and covered from sunlight.

Key features

5 in 1 versatility

One board for floors, pitched roofs, flat roofs, timber frame walls and ceilings keeps stock simple.

High performance PIR

Fibre free rigid PIR core with 0.022 W/mK gives high thermal resistance in a slim board.

Strong enough for screeded floors

140 kPa compressive strength and 30 kN/m² permanent dead load suit domestic, office and non-domestic floors.

Foil facings

Aluminium foil composite facings on both sides give a high water vapour resistance and low emissivity surface.

Certified

BBA Agrement Certificate 99/3569, ISO 9001 and ISO 14001 manufacture, and a CE Declaration of Performance.

Environmentally responsible

CFC and HCFC free blowing agent with zero ozone depletion potential and low global warming potential.

Technical specification

Product details

Brand

EcoTherm

Range

Eco-Versal

Core

Fibre free rigid polyisocyanurate (PIR)

Facings

Aluminium foil composite, both sides

Board size

2400 x 1200mm (2.88 m²)

Thicknesses

25mm to 150mm in this range

Performance

Thermal conductivity

0.022 W/mK (BS EN 13165)

Compressive strength

140 kPa typical at 10% compression (BS EN 826)

Floor loading

Resists 30 kN/m² uniformly distributed permanent load

Surface spread of flame

BS 476-7 Class 1; Euroclass F

Vapour control

Integral vapour control layer from foil facings

Maximum span on framing

600mm

Floor installation

Solid floor above slab

Lay closely butted with staggered joints, above the DPM

Under screed

Overlay with minimum 500 gauge protective membrane before screed on a concrete slab

Other floors

Suspended block and beam; suspended timber

U-values

Depend on exposed perimeter to area ratio; calculate for each project

Certification and environment

BBA Agrement Certificate

99/3569

Management systems

ISO 9001 and ISO 14001

Blowing agent

CFC and HCFC free; zero ODP; low GWP

BRE Green Guide

Generic specification rating A

Thickness variants: 2400 x 1200mm boards

Thickness

EcoTherm code

Boards per bundle

Bundle coverage

R-value (m²K/W)

Weight per board

25mm

PR25

13

37.44 m²

1.14

3.38 kg

30mm

PR30

10

28.80 m²

1.36

3.83 kg

40mm

PR40

8

23.04 m²

1.82

4.72 kg

50mm

PR50

6

17.28 m²

2.27

5.62 kg

70mm

PR70

4

11.52 m²

3.18

7.40 kg

75mm

PR75

4

11.52 m²

3.41

7.85 kg

90mm

PR90

4

11.52 m²

4.09

9.19 kg

100mm

PR100

3

8.64 m²

4.55

10.08 kg

120mm

PR120

3

8.64 m²

5.45

11.87 kg

150mm

PR150

2

5.76 m²

6.82

14.54 kg

Frequently asked questions

Can Eco-Versal go under a screeded underfloor heating system?

Yes. It is designed for solid floors under screed and its 140 kPa compressive strength suits screeded floors. Use it above the DPM, with a 500 gauge membrane over a concrete slab before screeding, and follow your UFH manufacturer's instructions.

What thicknesses are available?

25, 30, 40, 50, 70, 75, 90, 100, 120 and 150mm in this range, each 2400 x 1200mm. See the variant table for pack quantities, R-values and weights.

What is the thermal conductivity?

0.022 W/mK. Thermal resistance rises with thickness, from 1.14 m²K/W at 25mm to 6.82 m²K/W at 150mm.

How strong is it underfoot?

Typical compressive strength is 140 kPa and the boards resist a uniformly distributed permanent load of 30 kN/m², suitable for domestic, office and non-domestic floor categories in BS EN 1991-1-1.

Should the joints be taped?

Butt the boards closely with staggered joints and use proprietary self adhesive foil tape at joints to complete the vapour control layer and maximise thermal performance.

How should I store and cut the boards?

Store flat, dry and off the ground, covered from sunlight. Cut with a sharp knife or fine tooth saw, wear eye and hand protection, and use a dust mask when power tools create dust.

BTU Calculator

BTU & WATT Calculator

Room Dimensions

Length (in m):

Width (in m):

Height (in m):

Room Type

Living Room

Bedroom

Kitchen

Bathroom

Conservatory

Hallway

Glazing Type

Single Glazed

Double Glazed

Triple Glazed

External Walls

0 Wall

1 Wall

2 Walls

3 Walls

4 Walls

Insulation Level

Poor

Average

Good (New Build)

Calculate

Required Heating

0

Watts

0

BTUs