Drayton Digistat RF Wireless Room Thermostat | RF90T | Bluetooth

Description

The Drayton RF90T Digistat RF thermostat is a battery-powered wireless room thermostat supplied as an additional or replacement unit for the Drayton Digistat RF901 and RF902. It features a large backlit LCD and can be programmed from the thermostat itself or from the Wiser Home app over Bluetooth, with no Wi-Fi needed.

As a universal thermostat it runs as a 7-day, 5/2 day or 24-hour programmer or as a simple room thermostat, with optimised settings for gas, oil, heat pumps and electric heating. It is Boiler Plus compliant and can also be paired with an existing Drayton SCR receiver for single-channel use.

Bluetooth

Wiser Home app, no Wi-Fi

50m

Typical radio range

5-30C

Temperature range

2 x AA

Alkaline batteries

IP30

Protection rating

RF90T

Drayton part number

Thermostat only - receiver not included

The RF90T is the wireless thermostat (transmitter) only. It pairs with the RF901 or RF902 receiver and with existing Drayton SCR receivers for single-channel use. The receiver is not supplied with this item.

Radio range depends on the building

The typical range is 50m, but it is affected by the construction, density and number of walls between the thermostat and receiver.

Electrical safety

The receiver connects to 230V mains. The Digistat is designed for fixed wiring only, to comply with IET wiring regulations (BS 7671). Installation of the receiver must be carried out by a competent person.

Pairing a second thermostat to an RF902

Press and hold the left-hand button on the receiver for 3 seconds, then insert the batteries in the new thermostat to pair it.

Key Features

Bluetooth app control

Set and amend schedules, adjust temperature, use Boost and Timed Away mode from the Wiser Home app - no Wi-Fi required.

Universal programming

Use as a 7-day, 5/2 day, 24-hour programmable thermostat or a simple room thermostat, with 3 default programmes.

Smart start

Intelligent delayed start or optimum start and ON/OFF load compensation help comfort and efficiency.

Works with any heat source

Optimised settings for gas, oil, heat pumps and electric heating.

Easy to use

Large backlit LCD, recessed buttons needing minimal pressure, and optional audible feedback.

Installer features

Optional service interval mode with reminder, reduced comfort or off, reset by a 4-digit installer code.

Technical Specification

General

Brand

Drayton (Schneider Electric)

Product

Digistat RF thermostat (additional / spare)

Manufacturer part number

RF90T

Compatible with

Digistat RF901, Digistat RF902, existing Drayton SCR (single channel)

Programming modes

7-day, 5/2 day, 24-hour or simple room thermostat

Compliance feature

Boiler Plus compliant

Power and wireless

Power supply

2 x AA 1.5V alkaline batteries

Radio frequency

433.92 MHz

Radio signal range

50m typical

Bluetooth frequency

2402-2480 MHz

Max Bluetooth RF power

+10dBm

App

Wiser Home - Android 9 or higher, Apple iOS 12 or higher, Bluetooth 4.2 or higher

Environmental and approvals

Temperature range

5C to 30C

Operating temperature

0C to 40C

Storage temperature

-20C to 65C

Protection level

IP30

Rated impulse voltage

4kV

Pollution degree

2

Automatic action

100,000 cycles

Applied standards

EN 60730-1, EN 60730-2-7, EN 60730-2-9, ETSI EN 300 328, ETSI EN 301 489, EN IEC 63000

Directives

2014/53/EU Radio Equipment Directive, 2012/19/EU WEEE, 2011/65/EU RoHS

Sustainability

Green Premium product

In the box

Mounting

Desk stand and wall clip provided

Frequently Asked Questions

What does the RF90T work with?

It is the extra or replacement thermostat for the Digistat RF901 and RF902, and it can be paired with an existing Drayton SCR receiver for single-channel use.

Does it need Wi-Fi?

No. App control uses Bluetooth through the Wiser Home app, so no Wi-Fi is needed, and use of the app is optional.

Can I use it for a second heating zone?

Yes. It can be used in an RF902 dual-channel setup to give two separate heating zones, or heating and hot water control.

Does it work with heat pumps and electric heating?

The Digistat has optimised settings for gas, oil, heat pumps and electric heating. The switching itself is carried out by the receiver.

What batteries does it use and what is the range?

It runs on 2 x AA 1.5V alkaline batteries and has a typical radio range of 50m, depending on the walls in between.

How do I pair it to a receiver?

For an RF902, press and hold the left-hand button on the receiver for 3 seconds, then fit the batteries in the new thermostat.

BTU Calculator

BTU & WATT Calculator

Room Dimensions

Length (in m):

Width (in m):

Height (in m):

Room Type

Living Room

Bedroom

Kitchen

Bathroom

Conservatory

Hallway

Glazing Type

Single Glazed

Double Glazed

Triple Glazed

External Walls

0 Wall

1 Wall

2 Walls

3 Walls

4 Walls

Insulation Level

Poor

Average

Good (New Build)

Calculate

Required Heating

0

Watts

0

BTUs