Danfoss RET2001RF Wireless Digital Room Thermostat & RX1-S V2 Receiver

Description

The Danfoss RET2001RF wireless digital room thermostat and RX1-S V2 receiver set provides convenient, accurate on/off control for domestic heating systems. Designed for both home owners and heating installers, it combines a clear backlit digital display with dependable 433.92 MHz wireless communication, helping to simplify installation where running a thermostat cable is impractical.

The battery powered thermostat allows temperatures to be set between 5°C and 35°C, while the mains powered receiver delivers a volt free SPDT relay output for flexible boiler and heating control connections. With a typical in building wireless range of up to 30 metres, this Danfoss wireless thermostat kit is an effective upgrade for replacing compatible room temperature controls and improving everyday heating comfort.

Key Features

Wireless Heating Control Controls a compatible heating system without a wired connection between the thermostat and receiver.

Clear Digital Display Large backlit LCD screen makes room temperature monitoring and adjustments simple to read.

Flexible Receiver Output RX1-S V2 receiver features a volt free SPDT relay for compatible heating and boiler control applications.

Up to 30 m RF Range Offers a typical wireless range of 0.5 - 30 metres within a building, depending on its construction and obstructions.

Battery Powered Thermostat Runs on two AA alkaline batteries, with an expected battery life of at least two years.

Energy Efficiency Support ErP Class IV control with a declared 2% efficiency gain contribution for a more responsive heating setup.

Technical Specifications

Product type	Wireless digital room thermostat and RF receiver set
Manufacturer	Danfoss
MPN	087N6477
EAN / GTIN	5715162419205
Thermostat power supply	3 V DC, 2 x AA alkaline batteries
Receiver power supply	230 V AC ±10%, 50/60 Hz
Temperature setting range	5°C to 35°C
Operating temperature range	0°C to 40°C
Wireless frequency	433.92 MHz RF
Typical RF range in building	0.5-30 m, dependent on building construction and obstructions
Receiver relay output	Volt free, 1 x SPDT Type 1B
Relay rating	3 A resistive / 1 A inductive at 230 V AC
Thermostat protection rating	IP30 when installed
Thermostat dimensions	86 mm (H) x 86 mm (W) x 30 mm (D)
Receiver dimensions	84 mm (H) x 84 mm (W) x 29.7 mm (D)
ErP classification	Class IV, 2% efficiency gain
Approvals	CE and UKCA, EN 60730 compliance
Battery life	Minimum 2 years
Warranty	5 years

Ideal For This wireless Danfoss thermostat set is suitable for home owners replacing a compatible wired or wireless room thermostat, as well as heating professionals fitting a reliable single zone RF room control. It is particularly useful in renovations, extensions and rooms where a cable route between the thermostat position and boiler or heating controls is undesirable.

For correct and safe operation, installation of the 230 V AC receiver should be completed by a suitably qualified heating or electrical professional.

BTU Calculator

BTU & WATT Calculator

Room Dimensions

Length (in m):

Width (in m):

Height (in m):

Room Type

Living Room

Bedroom

Kitchen

Bathroom

Conservatory

Hallway

Glazing Type

Single Glazed

Double Glazed

Triple Glazed

External Walls

0 Wall

1 Wall

2 Walls

3 Walls

4 Walls

Insulation Level

Poor

Average

Good (New Build)

Calculate

Required Heating

0

Watts

0

BTUs