Bond-It Duo 2-in-1 D3 Water Resistant PVA Wood Glue 1L

Description

The Bond-It Duo 2-in-1 Wood Glue 1L is a ready to use, fast drying, water resistant PVA timber adhesive with a bond stronger than the wood itself. Use it as a general purpose joinery adhesive or wherever long term resistance to moisture is needed.

It conforms to EN 204 categories D3/3 and D3/4 and meets the BS 4071 creep resistance requirements for PVA emulsion adhesives for wood. Suitable for hard and soft woods, decorative laminates, chipboard, blockwood and other engineered timber panels, and for RF bonding machinery. In underfloor heating installs it is used for jointing panels and fixing boards to joists, applied away from the pipe channels.

1L

Container size

D3

EN 204 water resistant

50%

Total solids

6 to 14 m²

Surface bonding per 1L

1 hour

Clamp time

24 to 48h

Full strength

Not for permanent immersion or wet stressed timber

Not suitable for permanent immersion in water. Timber which in use will be permanently wet and stressed should be glued with a thermosetting adhesive. Do not use below 5°C (except with RF heating) or on timber with moisture content above 12%.

Keep glue out of pipe channels

When jointing routed underfloor heating panels, apply adhesive only where boards connect and keep it away from the pipe channels. Wipe off any excess immediately with a damp cloth while wet.

Easy clean-up

Clean tools after use with warm soapy water. Remove excess adhesive while wet using a damp cloth.

Key features

D3 water resistant

Conforms to EN 204 D3/3 and D3/4 for damp and humid conditions.

Stronger than the wood

A bond stronger than the wood itself, with 10 N/mm² shear strength wood to wood.

Fast drying

Bring surfaces together within 3 to 4 minutes and clamp for about 1 hour.

Creep resistant

Meets the BS 4071 creep test requirements for PVA emulsion wood adhesives.

Many substrates

Hard and soft woods, decorative laminates, chipboard, blockwood and engineered timber panels.

Good coverage

1L covers 6 to 14 m² for surface bonding and 5 to 6 m² for assembly bonding.

Technical specification

Product details

Brand

Bond-It

Product

Duo 2-in-1 Wood Glue

Manufacturer part number

PR004051

Size

1L

EAN

5060021364401

Colour

White

Specification

Chemical composition

Aqueous polyvinyl acetate dispersion

Total solids

50% +/- 1%

Specific gravity at 25°C

1.10

pH

2.8 to 3.6

Viscosity at 25°C

9,000 to 15,000 mPas

Minimum film forming temperature

4°C

Shear strength (wood to wood)

10 N/mm²

Standards

EN 204 D3/3 and D3/4; BS 4071 creep resistance

Application

Coverage, surface bonding

70 to 150 g/m² (1L covers 6 to 14 m²)

Coverage, assembly bonding

150 to 190 g/m² (1L covers 5 to 6 m²)

Method

Apply to one surface; join within 3 to 4 minutes; clamp for about 1 hour

Full strength

24 to 48 hours

Cleaning

Warm soapy water

Storage and limits

Shelf life

12 months from manufacture, unopened

Storage

Cool, dry, 5 to 25°C; protect from frost and sunlight

Minimum use temperature

5°C

Timber moisture limit

Not above 12%

Frequently asked questions

What is it used for?

A general purpose joinery adhesive for hard and soft woods, decorative laminates, chipboard, blockwood and engineered timber panels, and for applications needing long term moisture resistance.

Is it waterproof?

It is water resistant to EN 204 D3 and suits damp and humid conditions, but it is not suitable for permanent immersion in water.

How do I apply it?

Surfaces must be clean, dry and free from dust and grease. Apply to one surface only, join within 3 to 4 minutes and clamp for about 1 hour. Full strength comes after 24 to 48 hours.

How far does 1L go?

Around 6 to 14 m² for surface bonding (70 to 150 g/m²) and 5 to 6 m² for assembly bonding (150 to 190 g/m²).

Can I use it with routed underfloor heating panels?

Yes, for jointing panels and fixing boards to joists. Apply only where boards connect, keep it out of the pipe channels and wipe off excess with a damp cloth.

What are the temperature limits?

Do not use below 5°C (except with RF heating) or on timber above 12% moisture content. Store between 5 and 25°C away from frost and sunlight.

BTU Calculator

BTU & WATT Calculator

Room Dimensions

Length (in m):

Width (in m):

Height (in m):

Room Type

Living Room

Bedroom

Kitchen

Bathroom

Conservatory

Hallway

Glazing Type

Single Glazed

Double Glazed

Triple Glazed

External Walls

0 Wall

1 Wall

2 Walls

3 Walls

4 Walls

Insulation Level

Poor

Average

Good (New Build)

Calculate

Required Heating

0

Watts

0

BTUs