Atlantic Nanto Lite 2kW 10L Under Sink Electric Water Heater

Atlantic Nanto Lite 2kW 10L Under Sink Electric Water Heater (MPN: AH821547) is a space‑saving unvented hot water heater designed to fit neatly below a sink and provide almost instant hot water where it is needed. With a 10 litre storage tank, 2kW heating element and high‑performance insulation, it is well suited to kitchens, utility rooms, office tea points and small washrooms where demand is light to moderate.

Key Features

• 2kW electric element – delivers rapid heat‑up and recovery for everyday hot water tasks such as handwashing and light dishwashing.
• 10 litre storage tank – ideal for single outlets or small multi‑outlet applications with modest draw‑off volumes.
• Under‑sink, wall‑mounted design – compact body mounts directly beneath the sink, minimising visible pipework and saving space.
• Unvented point‑of‑use heater – provides mains‑pressure hot water without a separate header tank, integrating into standard plumbing layouts.
• Diamond‑quality enamel glass tank – corrosion‑resistant, glass‑lined inner tank for durability and extended service life.
• Magnesium anode protection – sacrificial anode improves anti‑corrosion performance, particularly in harder water areas.
• High‑density polyurethane insulation – thick CFC‑free foam around the tank reduces standing heat loss and improves efficiency.
• Analogue control with eco and vacation modes – front dial for temperature adjustment, eco 55°C mode for efficient daily use and vacation 7°C mode to minimise energy use when away.
• ErP B hot water rating – low standing losses for its size, helping to keep running costs and emissions down.
• 2‑year warranty – manufacturer’s warranty (subject to terms and correct installation).

Performance & Applications

• Typical applications: sinks and basins in homes, flats, offices, shops, clinics and small catering points where a compact local heater is preferred.
• Heat‑up times: approximate heat‑up time around 12 minutes for a 35°C temperature rise and around 18 minutes for a 50°C rise.
• Energy consumption: typical standing energy consumption about 0.48 kWh per 24 hours under standard test conditions.
• Best for: installations where long hot‑water pipe runs from a central cylinder would cause delay and water wastage.

Technical Highlights

• Brand: Atlantic – Nanto Lite series.
• MPN: AH821547.
• Tank volume: 10 litres.
• Rated output: 2kW immersion heater.
• Electrical supply: 230V single‑phase, 50Hz.
• Installation position: under sink, wall‑mounted.
• Dimensions (H x W x D): approx. 378 x 360 x 262 mm.
• Empty weight: around 6.9 kg.
• Heat‑up time to 50°C: ~18 minutes.
• Heat‑up time to 35°C: ~12 minutes.
• Standing loss / 24h: ~0.48 kWh.
• Energy label: ErP B for hot water.
• Wiring location: bottom left connection.
• Colour: white.

Installation Notes

• Should be installed by a competent person in accordance with local plumbing and electrical regulations and Atlantic’s installation instructions.
• As an unvented undersink heater, it must be fitted with the correct manufacturer‑specified safety kit, including pressure relief and expansion control where required.
• Mount securely to a suitable wall under the sink, allowing access for pipework, electrical connection and future maintenance (including anode inspection or replacement).
• Use the front dial and eco/vacation modes to balance user comfort with reduced scaling risk and lower energy consumption.