Neomitis Wireless RF 7 Day 2 Channel Programmer | PRG7RF | 230V

Description

The Neomitis PRG7RF Wireless RF 7 Day 2 Channel Digital Programmer gives you straightforward control over both central heating and domestic hot water. Its reliable radio frequency (RF) link removes the need to run a cable to the room thermostat, making it an excellent choice for boiler upgrades, system replacements and renovation projects.

With 7 day programming, independent heating and hot water channels, a clear backlit LCD display and simple slide controls, the programmer helps households heat their home only when required. It is suitable for Gravity and Pumped boiler systems and includes practical functions such as Boost, Advance and automatic summer/winter changeover.

7 Day

Programmable schedule

2 Channel

Heating and hot water

RF

Wireless thermostat link

230V

Mains powered programmer

IP30

Protection rating

3 Years

Manufacturer warranty

Safety and installation: This programmer operates at 220-240V and must be installed in accordance with current UK wiring requirements, including BS 7671. Installation and electrical connections should be carried out by a competent person.

Compatibility: The PRG7RF is designed for use with compatible heating and hot water systems, including Gravity and Pumped boiler installations. Always confirm system requirements and wiring configuration before purchase or installation.

Wireless convenience: The supplied RF room thermostat requires no control wiring between the thermostat and programmer, helping to reduce disruption to walls, floors and decoration during installation.

Key Features

Independent 2 Channel Control

Separate CH/Z1 and HW/Z2 outputs allow heating and hot water to be programmed independently, improving comfort and helping avoid unnecessary energy use.

Wireless RF Thermostat

The included RF room thermostat communicates wirelessly with the programmer, making it ideal where running new cable would be difficult or disruptive.

Flexible 7 Day Programming

Create a different heating pattern for each day of the week, with 2 or 3 ON periods per day to match daily routines.

Boost and Advance Functions

Use Boost for a temporary 1, 2 or 3 hour override, or Advance to move to the next programmed period without altering the weekly schedule.

Clear Backlit Display

The large backlit LCD and intuitive slide controls make programming and mode selection simple, even in cupboards or low light locations.

Frost Protection and Service Reminder

A built-in temperature sensor supports frost protection, while the service interval function helps keep heating maintenance on schedule.

Technical Specifications

General

Brand

Neomitis

Model / MPN

PRG7RF

EAN

3760025250107

Product Type

Wireless RF 7 day 2 channel digital programmer with RF room thermostat

Colour

White

Warranty

3 years, subject to manufacturer terms and conditions

Electrical

Power Supply

220-240V, 50Hz

Output Rating

3(2)A per relay, 240V, 50Hz

Channels

2 channels: CH/Z1 heating and HW/Z2 hot water

Rated Impulse Voltage

4000V

Automatic Action

100,000 cycles

Insulation

Class II, double insulation

Programmer

Programming

7 day programmable, 2 or 3 ON periods per day

Display

Large backlit LCD with white backlight

Functions

Boost, Advance, holiday mode, auto summer/winter changeover, service interval

Dimensions

150mm (W) x 95mm (H) x 34mm (D)

Mounting

Universal wall plate mounting, suitable for most existing wall plates

RF Room Thermostat

Connection

Wireless RF communication

Temperature Range

+5°C to +30°C

Power Supply

2 x 1.5V AA alkaline batteries (LR6)

Battery Life

Approximately 2 years

Typical RF Range

Up to 15m in the home, actual range varies with building construction and interference

Environment and Protection

Protection Rating

IP30

Operating Temperature

0°C to +40°C

Storage Temperature

-20°C to +60°C

Humidity

Up to 80% at +25°C, non condensing

Compatibility

Suitable for Gravity and Pumped boiler systems

Frequently Asked Questions

What is the difference between a 1 channel and 2 channel programmer?

A 2 channel programmer controls central heating and domestic hot water independently. This allows you to set different operating times for each service, rather than heating water whenever the heating is active.

Does this programmer need to be wired to the thermostat?

No. The PRG7RF uses a wireless RF room thermostat, so no thermostat control cable is required between the thermostat and programmer. The programmer itself requires a mains electrical connection.

Which heating systems is it suitable for?

It is suitable for Gravity and Pumped boiler systems. As with any heating control, the installer should confirm compatibility with the existing boiler, valves, cylinder and wiring arrangement before installation.

Can I override the programmed schedule?

Yes. The Boost function provides a temporary override for 1, 2 or 3 hours, while the Advance function moves the system to the next programmed ON or OFF period without changing the saved weekly schedule.

Who should install this product?

Because the programmer is connected to 230V mains wiring, installation should be completed by a competent person in line with BS 7671 and the manufacturer’s installation instructions.

BTU Calculator

BTU & WATT Calculator

Room Dimensions

Length (in m):

Width (in m):

Height (in m):

Room Type

Living Room

Bedroom

Kitchen

Bathroom

Conservatory

Hallway

Glazing Type

Single Glazed

Double Glazed

Triple Glazed

External Walls

0 Wall

1 Wall

2 Walls

3 Walls

4 Walls

Insulation Level

Poor

Average

Good (New Build)

Calculate

Required Heating

0

Watts

0

BTUs