Samsung Mono 16kW Heat Pump & Joule Kodiak 250L Cylinder | 12.28kW | 3 Zone

Description

This system pairs the Samsung Mono 16kW air source heat pump (12.28kW nominal winter output) with the Joule Kodiak 250L Standard Pre-Plumbed Cylinder, combining Samsung's highest-capacity Gen 6 monobloc unit with extra hot water reserve for larger homes or properties with higher simultaneous demand. The Kodiak cylinder arrives factory pre-plumbed with its zonal control manifold already fitted, cutting installation time compared with plumbing a heat pump to a standard cylinder on site.

The patented modular zonal control manifold manages 3 zones - 1 hot water and 2 heating circuits - from a single compact unit, so radiators, underfloor heating, and domestic hot water can all run to their own independent temperature settings. The 16kW heat pump continues to operate down to -25°C outdoor air temperature, giving reliable performance for the largest properties this range is designed to serve.

12.28kW

Winter Heating Output

250L

Cylinder Capacity

3 Zone

Pre-Plumbed Manifold

-25°C

Min. Operating Temp

65°C

Max Hot Water Temp

R32

Refrigerant (GWP 675)

Additional Components Are Not Included

This listing covers the Samsung 16kW heat pump and Joule Kodiak 250L Standard cylinder only. Items such as the potable expansion vessel, Y strainer with isolation valve, braided hoses, anti-vibration feet, and heat pump fluid are not included and should be ordered separately to complete the installation.

MCS-Certified Installation Required

Installation must be carried out by an MCS-certified installer to ensure compliance with UK regulations, to qualify for available government funding schemes such as the Boiler Upgrade Scheme, and to validate the full manufacturer warranty on both heat pump and cylinder.

Long-Term Warranty Cover

The heat pump carries a 7-year warranty when commissioned by Joule or a trained installer, while the Kodiak cylinder body is covered for up to 25 years with registration, and its components for 2 years - giving strong long-term protection across the whole system.

Highest Capacity in the Range

At 16kW nominal output, this is the largest heat pump in Samsung's Gen 6 monobloc line-up, suited to larger properties or higher-demand applications.

More Hot Water Headroom Than 200L

At 250 litres, this cylinder gives extra buffer for households with higher simultaneous hot water demand than the 200L option comfortably covers.

Factory Pre-Plumbed Cylinder

The 250L Kodiak arrives with its hydraulic and zonal control manifold pre-fitted, cutting on-site plumbing time compared with a bare cylinder and separate control kit.

3-Zone Independent Control

The patented modular manifold manages 1 hot water zone and 2 heating zones independently, so radiators and underfloor heating can each run at their own optimum temperature.

True Monobloc Heat Pump

Samsung's Gen 6 outdoor unit has the entire refrigeration circuit factory-sealed, removing the need for on-site F-Gas handling.

Cold-Climate Performance at Scale

Rated to operate continuously down to -25°C outdoor air temperature, maintaining full heating output through the coldest UK winters even at this higher capacity.

Heat Pump Performance

Nominal Output (Summer Rating)

16 kW

Heating Output (A7/W35, Winter)

12.28 kW

Refrigerant Type

R32 (GWP 675)

Operating Range (Heating)

-25°C to +35°C outdoor

Max Hot Water Temperature

65°C

Power Supply

Single phase, 220-240V, 50Hz

Sound Level

Approx. 45 dB(A)

Dimensions (H x W x D)

1,420 x 940 x 330 mm

Kodiak 250L Standard Cylinder

Diameter

530 mm

Height

1,770 mm

Material

Stainless steel

Zones

3 (1 hot water, 2 heating)

Maximum Inlet Pressure

10 bar

Maximum Operating Pressure

7 bar

Mounting

Floor-standing

Warranty

Heat Pump

7 years when commissioned by Joule or a trained installer

Cylinder Body

25 years

Cylinder Parts

2 years

Check Ceiling Height Before Ordering

At 1,770mm tall, this cylinder requires adequate ceiling clearance in the plant room or airing cupboard. Confirm available headroom before ordering, particularly in loft or under-stair installations.

Why is the heat pump rated at both 16kW and 12.28kW?

16kW is the unit's nominal summer-rated capacity. In UK winter design conditions (A7/W35), the same unit delivers 12.28kW of usable heating output, which is the figure most relevant for sizing against a property's actual winter heat loss.

What comes in the box with this system?

This listing includes the Samsung 16kW heat pump and the 250L Kodiak Standard cylinder only. Additional components - expansion vessel, Y strainer, braided hoses, anti-vibration feet, and heat pump fluid - are not included and should be ordered separately.

How does the 250L option differ from the 200L version?

Both share the same 16kW heat pump and 3-zone manifold. The 250L cylinder simply holds 50 litres more hot water in a taller, narrower case, suiting homes with higher simultaneous demand.

Will this cylinder fit in a standard airing cupboard?

At 1,770mm in height, this is a tall unit. Always confirm available ceiling clearance and floor space before ordering, especially where the installation location has restricted headroom.

Is MCS certification required?

Yes. Installation should be carried out by an MCS-certified installer to comply with UK regulations, access funding schemes such as the Boiler Upgrade Scheme, and validate the manufacturer warranty.

BTU Calculator

BTU & WATT Calculator

Room Dimensions

Length (in m):

Width (in m):

Height (in m):

Room Type

Living Room

Bedroom

Kitchen

Bathroom

Conservatory

Hallway

Glazing Type

Single Glazed

Double Glazed

Triple Glazed

External Walls

0 Wall

1 Wall

2 Walls

3 Walls

4 Walls

Insulation Level

Poor

Average

Good (New Build)

Calculate

Required Heating

0

Watts

0

BTUs