Inta Y Pattern Strainer 1 Inch With Isolation Valve | HZK-0Y-000001F | Brass

Description

The 1" Y Pattern Strainer with Isolation protects heat pump and heating system components by filtering debris out of the water circuit before it reaches sensitive equipment such as pumps, solenoid valves, and heat exchangers. Its integral isolation valve means the strainer element can be removed and cleaned, or the section of pipework isolated for servicing, without draining down the entire system.

Constructed in solid brass for durability and corrosion resistance, this Y pattern strainer installs inline with a standard 1" pipe connection, making it a straightforward addition to most heating and heat pump pipework. It is a small, low-cost component that meaningfully protects the reliability of far more expensive downstream equipment.

1"

Connection Size

Brass

Body Material

Y Pattern

Strainer Type

Integral

Isolation Valve

Removable

Strainer Element

Inline

Installation

Service Without Draining the System

The integral isolation valve allows the strainer element to be isolated and removed for cleaning without needing to drain the wider heating or heat pump circuit, significantly reducing the time and mess involved in routine maintenance.

Protects Sensitive Downstream Equipment

Debris circulating in a heating system can damage or block solenoid valves, circulating pumps, and heat exchangers. Fitting a Y pattern strainer upstream of this equipment is a low-cost way to reduce the risk of component failure and unplanned callouts.

Integral Isolation Valve

The built-in isolation valve lets you shut off flow through the strainer for cleaning or servicing, without draining the surrounding system.

Solid Brass Construction

A brass body gives long-term durability and corrosion resistance under typical heating system water conditions.

Removable Strainer Element

The strainer element lifts out for cleaning, so the filter can be maintained repeatedly over the life of the system rather than being a single-use component.

Standard 1" Inline Fitting

Sized for standard 1" pipe connections, making it compatible with common heating and heat pump pipework without special adaptors.

Protects Solenoid Valves and Pumps

Filters out debris and particulate contamination before it can disrupt or damage solenoid valves, pumps, and other mechanical components downstream.

Simple Inline Installation

Installs directly inline with existing pipework, requiring no special tools or complex fitting procedure.

Product Details

Valve Type

Y pattern strainer with integral isolation valve

Connection Size

1" (standard pipe connection)

Body Material

Brass

Strainer Element

Removable, for cleaning

Application

Typical Use

Protecting solenoid valves, pumps, and heat exchangers from debris

Installation

Inline, standard 1" pipe connection

Maintenance

Isolate and remove strainer element for cleaning without draining the system

Do I need to drain the system to clean the strainer?

No. The integral isolation valve allows you to shut off flow through the strainer so the element can be removed and cleaned, or the section isolated for servicing, without draining the wider heating or heat pump system.

What does a Y pattern strainer protect against?

It filters debris and particulate contamination out of the water circuit before it reaches sensitive components such as solenoid valves, circulating pumps, and heat exchangers, reducing the risk of blockages or premature wear.

What pipe size does this strainer fit?

This strainer is sized for a standard 1" pipe connection, suiting most domestic heating and heat pump pipework runs at this diameter.

Is the strainer element reusable?

Yes. The strainer element is removable and can be cleaned repeatedly, rather than needing replacement each time debris builds up.

BTU Calculator

BTU & WATT Calculator

Room Dimensions

Length (in m):

Width (in m):

Height (in m):

Room Type

Living Room

Bedroom

Kitchen

Bathroom

Conservatory

Hallway

Glazing Type

Single Glazed

Double Glazed

Triple Glazed

External Walls

0 Wall

1 Wall

2 Walls

3 Walls

4 Walls

Insulation Level

Poor

Average

Good (New Build)

Calculate

Required Heating

0

Watts

0

BTUs