The Heatrae Sadia Handy No Touch is a compact 3.1kW instantaneous handwash water heater with fully automatic infrared sensor activation — no lever, tap or button to touch. Designed to mount directly over a basin or sink, it needs only a cold water feed and a mains electrical connection to deliver warm water for handwashing on demand, with no storage cylinder or standing heat loss.
Built for hygiene-critical environments such as healthcare facilities, food service premises, schools and public washrooms, its touch-free operation removes a common cross-contamination point at the handwash station, while flow/temperature stabilisation keeps output consistent even as mains pressure varies.
Flow Rate Note
Heatrae Sadia doesn't publish a single delivered flow-rate figure for the Handy No Touch, since flow and outlet temperature are jointly set on site via the tamper-proof flow/temperature adjuster and are self-stabilising once configured. Installers should refer to the manufacturer's fitting instructions for the commissioning procedure.
Fully Touch-Free Activation
An infrared sensor starts and stops the water flow automatically as hands are presented and withdrawn, removing a touchpoint that would otherwise need cleaning between uses in high-traffic washrooms.
25-Second Automatic Run Cycle
Each activation runs for 25 seconds, giving a consistent handwash duration without the unit being left running unnecessarily — useful for water and energy control in busy facilities.
Dual-Stage Overheat Protection
A self-resetting first-stage cut-out at 52°C (resetting once the water cools to 42°C) is backed by a non-self-resetting second-stage cut-out at 92°C, giving layered protection against scalding.
Flow/Temperature Stabilisation
Output temperature and flow rate stay consistent even as incoming mains pressure fluctuates, thanks to the unit's flow/temperature stabilised design — set once via the tamper-proof adjuster and requiring no further user intervention.
Durable 200mm Swivel Spout
The 200mm stainless steel swivel spout delivers a consistent, splash-free spray pattern suited to handwash basins of varying widths and positions.
Simple Push-Fit Installation
A 15mm female push-fit water connection and concealed electrical supply keep first-fix quick and tidy, with the slimline casing needing only a small amount of wall space.
| Performance |
| Heating Element |
3.1kW @ 240V / 2.9kW @ 230V |
| Activation Type |
Automatic infrared sensor (no-touch) |
| Automatic Run Time |
25 seconds per activation |
| Control |
Tamper-proof flow/temperature adjuster (installer-set) |
| Safety |
| 1st-Stage Cut-Out (Self-Resetting) |
52°C, resets at 42°C |
| 2nd-Stage Cut-Out (Non-Resetting) |
92°C |
| Pressure Protection |
Integral pressure relief device in container base |
| Construction & Physical |
| Outer Casing |
White moulded ABS plastic |
| Heating Element Type |
Copper-sheathed rod |
| Water Container Material |
Glass-reinforced nylon |
| Spout |
200mm stainless steel, swivel |
| Water Connection |
15mm female push-fit |
| Indicators |
| Power Indicator |
'Power On' status light |
| Compliance |
| MPN |
95020115 |
| EAN |
5012496221154 |
| Guarantee |
2 years |
Does the Handy No Touch need a hot water supply?
No — it only needs a cold water mains feed and a mains electrical connection. It heats water instantaneously as it passes through, with no storage cylinder or pre-heated hot water supply required.
How is the water temperature controlled?
Temperature and flow are set together via a tamper-proof adjuster during installation, and the unit's flow/temperature stabilisation keeps delivered temperature consistent afterwards, even if mains pressure varies during the day.
What's the difference between the No Touch and standard Handy models?
The Handy No Touch uses automatic infrared sensor activation, while the standard Handy 3/7 range uses a single-turn rotary control dial for manual on/off, temperature and flow adjustment. Both share the same 3.1kW element, casing and safety cut-outs.
How long does each handwash cycle run for?
25 seconds automatically once the sensor detects hands are present, after which the unit shuts off until reactivated.
Is it suitable for healthcare or food service environments?
Yes — the touch-free activation is specifically well suited to hygiene-critical settings such as healthcare facilities, food service premises and other high-traffic washrooms where minimising cross-contamination at the handwash point matters.
