Andersen A2 22kW 6.5m Tethered EV Charger | A2265MBMB | IP65

Description

The Andersen A2 22kW Tethered EV Charger in Midnight Black is a premium three phase electric vehicle charge point designed for homeowners and trade installers who want dependable performance, discreet cable storage and a refined wall mounted finish. With up to 22kW charging, a 6.5m tethered Type 2 cable, IP65 weather protection and integrated Open PEN protection, it is a practical choice for domestic driveways, garages and commercial staff parking areas.

The A2 combines smart charging controls, adaptive load management and a hidden cable tidy system to keep the installation neat when not in use. Its aluminium construction, status lighting and app based control make it suitable for daily home charging while giving installers a professional, future ready unit to specify.

22kW

Maximum AC charging output

6.5m

Tethered Type 2 cable

32A

Rated current per phase

IP65

Enclosure protection rating

3 Phase

400V AC supply required

Mode 3

IEC 61851-1 compliant

Important compatibility note: This is a 22kW three phase charger and requires a suitable 400V three phase electricity supply. It is not suitable for achieving 22kW charging from a standard single phase domestic supply. Please confirm the electrical supply and installation requirements before ordering.

Installer friendly protection: The A2 includes 6mA DC leakage protection, PME fault monitoring and Open PEN technology, helping to support a compliant installation without the need for an earth rod where the installation design allows.

Key Features

Up to 22kW Three Phase Charging

Delivers fast AC charging at up to 22kW when connected to a compatible three phase supply, helping reduce charging time for compatible electric vehicles.

6.5m Tethered Type 2 Cable

The integrated 6.5m EVOFLEK cable is flexible, neatly stored within the unit and fitted with a Type 2 connector for broad EV compatibility.

Hidden Cable Management

The tethered cable winds neatly into the charger housing, keeping the wall mounted unit tidy and reducing trailing cable around the driveway or garage.

Smart App Control

Use the Andersen app for charge scheduling, charging reports, remote locking, over the air updates and solar monitoring.

Integrated Safety Protection

Includes 6mA DC protection, earth monitoring, PME monitoring, contactor fault detection and a start up self test.

Premium Midnight Black Finish

The durable aluminium enclosure and Midnight Black finish provide a modern, low profile appearance suitable for contemporary homes and professional installations.

Technical Specifications

Charging Performance

Maximum charging power

22kW

Charging modes

3kW, 7kW and 22kW fast charging

Rated current

32A per phase

Supply voltage

230V / 400V AC

Supply frequency

50 / 60Hz

Connector

Tethered Type 2, 6.5m cable

Safety & Compliance

Charging standard

IEC 61851-1 Mode 3

Connector standard

IEC 62196-2

DC leakage protection

6mA DC protection

PEN protection

Open PEN technology to BS 7671 722.411.4.1(iv)

Fault monitoring

Earth monitoring, PME monitoring, contactor fault detection and start up self test

Certification

CE certified, OZEV accredited

Connectivity & Smart Controls

WiFi

802.11 b/g/n, 2.4GHz, up to 150Mbps

Bluetooth

Bluetooth 5, for setup only

App functions

Scheduling, charge reporting, remote locking, OTA updates and solar monitoring

Load management

Wired current sensor, current reducing hardware and peak load monitoring

Construction & Installation

Dimensions

494 x 348 x 148mm including 5mm wall spacer

Enclosure material

Aluminium with polycarbonate blend components

Ingress protection

IP65 enclosure and plug compartment; Type 2 plug IP44 when protective cap is secured

Operating temperature

-25°C to +45°C

Humidity

Up to 95% RH, non condensing

Mounting

Permanent structure, recommended installation height 0.75m to 1.2m from ground level

Upstream protection

40A Type A RCBO or 40A Type A RCD plus 40A B-curve MCB

Frequently Asked Questions

What power supply does the Andersen A2 22kW require?

This model is configured for 22kW three phase charging and requires a compatible 400V three phase supply. A qualified electrician should confirm the supply arrangement, protective devices and installation design before fitting.

Which electric vehicles can use this charger?

The A2 uses a tethered Type 2 connector and supports IEC 62196-2 compatible electric vehicles. Actual charging speed depends on the vehicle’s onboard charger, its AC charging limit and the available electricity supply.

Can the Andersen A2 be installed outdoors?

Yes. The enclosure and plug compartment are rated IP65, so the unit can be installed indoors or outdoors. The Type 2 plug is IP44 when its protective rubber cap is fully secured while not in use.

Does it include smart charging and scheduling?

Yes. The charger supports WiFi connectivity and the Andersen app, enabling charge scheduling, charging reports, remote locking, over the air updates and solar monitoring.

Is an earth rod required?

The A2 includes Open PEN technology and PME fault monitoring, which can remove the need for an earth rod where the installation design permits. A qualified installer should assess the final installation in line with current UK wiring requirements.

What warranty is included?

Andersen product information refers to a 3 year warranty, while the manufacturer’s current product information also refers to 7 year Andersen Care Cover. Warranty duration and eligibility should be confirmed against the manufacturer’s current warranty terms and product registration.

BTU Calculator

BTU & WATT Calculator

Room Dimensions

Length (in m):

Width (in m):

Height (in m):

Room Type

Living Room

Bedroom

Kitchen

Bathroom

Conservatory

Hallway

Glazing Type

Single Glazed

Double Glazed

Triple Glazed

External Walls

0 Wall

1 Wall

2 Walls

3 Walls

4 Walls

Insulation Level

Poor

Average

Good (New Build)

Calculate

Required Heating

0

Watts

0

BTUs