Schletter Mid Clamp Classic Wide 30-40mm Black and Silver | 131121-021 / 131121-92

Description

The Schletter Mid Clamp Classic Wide secures framed solar modules with frame heights of 30-40mm between adjacent panels on Schletter Classic-profile mounting rails. Pre-assembled from durable anodised aluminium, it offers a firm, gentle grip that spreads clamping load evenly across the module frame edge.

Unlike the click-in Rapid16 range, the Classic Wide clamp uses Schletter's established bolt-through fixing method onto Classic-profile rails, supporting both vertical and horizontal module orientation from a single part.

30-40mm

Module Frame Range

50mm

Clamp Length

10mm

Clamp Depth

V+H

Vertical & Horizontal

Aluminium

Material

Anodised

Surface Finish

Key Features

Wide Clamping Surface

The wider clamp foot spreads pressure across a greater area of the module frame, reducing point-loading on the panel edge compared to narrower clamp designs.

Vertical & Horizontal Mounting

Supports modules installed in either portrait or landscape orientation, giving flexibility when planning array layouts on Classic-profile rail runs.

Pre-Assembled Hardware

Supplied pre-assembled for quick fitting on site, reducing the number of loose parts installers need to manage during array build-out.

Grounding Compliance

Designed to maintain electrical continuity across the module frame and rail system, supporting the array's overall equipotential bonding.

Durable Anodised Finish

High-quality anodised aluminium construction resists corrosion and weathering, matching Schletter's long-term outdoor durability standards.

Compatible With Classic Rail Range

Designed to fit a wide range of Schletter Classic-profile mounting rails, giving continuity across mixed-generation Schletter installations.

Available Finishes

Finish

Part Number

Clamp Height

Silver (natural anodised)

SLT-131121-021

30-40mm

Black anodised

SLT-131121-921

30-40mm

Technical Specification

Clamp Specification

Clamp Type

Mid (centre) clamp, Classic Wide profile

Compatible Module Frame Height

30 – 40 mm

Clamp Length

50 mm

Clamp Depth

10 mm

Mounting Orientation

Vertical (portrait) and horizontal (landscape)

Assembly

Pre-assembled

Materials & Finish

Clamp Material

Aluminium

Available Finishes

Silver anodised / black anodised

Corrosion Protection

Anodised aluminium surface treatment

Frequently Asked Questions

What is the difference between the Classic Wide clamp and the Rapid16 mid clamp?

The Classic Wide clamp is designed for Schletter's Classic-profile rail system and uses a traditional bolt-through fixing, while the Rapid16 range clicks into an 8mm KlickNut channel. Confirm which rail profile you are using before ordering clamps, as the two ranges are not directly interchangeable.

Can this clamp be used for both portrait and landscape module layouts?

Yes — the Mid Clamp Classic Wide supports both vertical and horizontal module mounting from the same part.

What module frame thicknesses does this clamp suit?

It is designed for framed modules with a frame height of 30 to 40mm. For thicker frames, check Schletter's wider clamp range before ordering.

Is this clamp pre-assembled or supplied as separate parts?

It is supplied pre-assembled, so the fixing hardware is already fitted to the clamp body ahead of installation.

Does this clamp support the array's earthing requirements?

Yes, it is designed to maintain electrical continuity across the module frame and rail as part of the array's overall equipotential bonding, in line with standard PV earthing practice.

BTU Calculator

BTU & WATT Calculator

Room Dimensions

Length (in m):

Width (in m):

Height (in m):

Room Type

Living Room

Bedroom

Kitchen

Bathroom

Conservatory

Hallway

Glazing Type

Single Glazed

Double Glazed

Triple Glazed

External Walls

0 Wall

1 Wall

2 Walls

3 Walls

4 Walls

Insulation Level

Poor

Average

Good (New Build)

Calculate

Required Heating

0

Watts

0

BTUs