The Fastensol Plastic Canopy (1.2 x 0.8m, Black Frame, Clear Cover) is a weatherproof shelter designed to protect outdoor-mounted inverters and batteries from direct sun and light-to-medium rain, helping equipment run at its intended efficiency for longer.
Solar inverters are not designed to perform at their best in direct sunlight — heat build-up causes them to overheat, reducing conversion efficiency and shortening service life. This UV-resistant polycarbonate canopy shields outdoor units from glare and harmful UV rays, giving installers a simple, cost-effective way to protect equipment and help maintain the inverter warranty.
5mm
Polycarbonate Thickness
⚠ Important Safety Information
This canopy is designed for
fitting to cement/masonry walls only — it is not suitable for wooden houses. It is also
not designed for areas with strong winds, and any accumulated snow should be cleared promptly to prevent load damage.
Key Features
Weather-Resistant Protection
Shelters outdoor-installed inverters or batteries from glaring sun and light-to-medium rain, reducing the risk of weather-related faults.
UV-Resistant Coating
A protective surface coating shields equipment from harmful UV rays, helping prevent the overheating that reduces inverter efficiency and shortens component lifespan.
Helps Maintain Inverter Warranty
Many inverter manufacturers require adequate weather protection for outdoor installations — this canopy provides a straightforward way to support ongoing warranty compliance.
Simple Wall-Mounted Design
Suitable for home and outdoor main unit installations, with a push-fit panel and bracket system for straightforward assembly.
All Fixings Included
Supplied complete with all necessary mounting hardware for fitting directly to a cement or masonry wall.
Durable Construction
Built from 5mm polycarbonate panels with a polypropylene and aluminium frame, combining impact resistance with a lightweight, corrosion-resistant structure.
Technical Specification
Product Details
ManufacturerFastensol
Part numberF-C1200
ColourBlack frame, clear cover
ApplicationWeather protection for outdoor inverters and batteries
Wall bracket230H x 750L mm
Dimensions
Height230mm
Length1200mm
Width800mm
Materials
Cover panels5mm polycarbonate
Frame componentsPolypropylene and aluminium
Installation Requirements
Suitable wall typeCement / masonry walls only
Not suitable forWooden houses, high-wind areas
Maintenance noteClear accumulated snow promptly in snow-prone areas
ℹ Please Note
A separate
1000mm version (F-C1000) is also available from Fastensol for smaller inverters or batteries where the full 1200mm width isn't required.
Frequently Asked Questions
Why does an outdoor inverter need a canopy?
Inverters are not designed to perform well in direct sunlight — the resulting heat build-up reduces conversion efficiency and shortens the unit's lifespan. A canopy shields the unit from sun and light rain to help it run as intended.
What wall types is this canopy suitable for?
It is designed for fitting to cement or masonry walls only and is not suitable for installation on wooden houses.
Is this canopy suitable for exposed or windy locations?
No — the manufacturer states it is not designed for areas with strong winds. It is intended for typical sheltered residential and commercial wall-mount locations.
Does it come with all the fittings needed to install it?
Yes — all necessary mounting hardware is included for wall installation, along with full instructions in the product packaging.
What size inverter or battery will this canopy cover?
At 1200mm long x 800mm wide, the F-C1200 suits most residential inverters and battery units. A smaller 1000mm version (F-C1000) is also available for more compact equipment.
