{"product_id":"engo-efs300-temperature-sensor-ntc-10kohm","title":"ENGO EFS300 Floor Temperature Sensor – NTC 10kΩ, 3m Cable, for Underfloor Heating Thermostats","description":"\u003cstyle\u003e\n  .engo-desc * { box-sizing: border-box; }\n  .engo-desc { font-family: inherit; color: inherit; line-height: 1.7; font-size: 16px; }\n  .engo-desc p, .engo-desc li, .engo-desc td, .engo-desc th { font-size: 16px !important; line-height: 1.7; }\n  .engo-desc h2 { font-size: 22px !important; font-weight: 700; color: #1a1a1a; border-bottom: 2px solid #1a1a1a; padding-bottom: 6px; margin: 2rem 0 1rem; line-height: 1.3; }\n  .engo-desc h3 { font-size: 17px !important; font-weight: 700; color: #1a1a1a; margin: 1.2rem 0 0.4rem; line-height: 1.4; }\n  .engo-desc p { margin: 0 0 1rem; }\n  .engo-desc ul { padding-left: 1.5rem; margin: 0 0 1rem; }\n  .engo-desc ul li { margin-bottom: 0.5rem; }\n\n  .engo-intro-box { background: #f5f5f5; border-left: 4px solid #222; padding: 1.1rem 1.4rem; border-radius: 0 6px 6px 0; margin-bottom: 1.5rem; }\n  .engo-intro-box p { margin: 0 !important; }\n\n  .engo-badge { display: inline-block; background: #222; color: #fff; font-size: 13px !important; font-weight: 700; border-radius: 4px; padding: 2px 10px; margin-right: 6px; margin-bottom: 4px; vertical-align: middle; letter-spacing: 0.04em; }\n  .engo-badge.accent { background: #c05a00; }\n  .engo-badge.green { background: #2e7d32; }\n\n  .engo-why-grid { display: grid; grid-template-columns: repeat(auto-fill, minmax(240px, 1fr)); gap: 0.85rem; margin-bottom: 1.2rem; }\n  .engo-why-card { background: #f9f9f9; border: 1px solid #ddd; border-radius: 6px; padding: 1rem 1.1rem; line-height: 1.6; }\n  .engo-why-card strong { display: block; color: #1a1a1a; margin-bottom: 0.35rem; font-size: 16px !important; }\n\n  .engo-callout { background: #f0f8f0; border: 1px solid #a5d6a7; border-radius: 6px; padding: 1rem 1.3rem; margin: 1.2rem 0; }\n  .engo-callout h3 { margin-top: 0 !important; }\n  .engo-callout p { margin: 0 !important; }\n\n  .engo-callout-blue { background: #f0f4ff; border-left: 4px solid #1a1a1a; border-radius: 0 6px 6px 0; padding: 1rem 1.3rem; margin: 1.2rem 0; }\n  .engo-callout-blue p { margin: 0 !important; }\n\n  .engo-spec-table { width: 100%; border-collapse: collapse; margin-bottom: 1.2rem; }\n  .engo-spec-table th { background: #222; color: #fff !important; text-align: left; padding: 0.7rem 1rem; font-weight: 600; font-size: 16px !important; }\n  .engo-spec-table td { padding: 0.6rem 1rem; border-bottom: 1px solid #e0e0e0; vertical-align: top; font-size: 16px !important; }\n  .engo-spec-table tr:nth-child(even) td { background: #f5f5f5; }\n  .engo-spec-table td:first-child { font-weight: 600; color: #1a1a1a; width: 42%; }\n\n  .engo-pills { display: flex; flex-wrap: wrap; gap: 0.55rem; margin-bottom: 1.2rem; }\n  .engo-pill { background: #f0f0f0; color: #1a1a1a; border-radius: 20px; padding: 0.35rem 1rem; font-size: 15px !important; font-weight: 500; border: 1px solid #ccc; line-height: 1.4; }\n\n  .engo-faq-item { border-bottom: 1px solid #e0e0e0; padding: 1rem 0; }\n  .engo-faq-item:last-child { border-bottom: none; }\n  .engo-faq-item p { margin: 0.4rem 0 0 !important; }\n\n  .engo-inbox-list { list-style: none !important; padding: 0 !important; margin: 0 0 1rem !important; }\n  .engo-inbox-list li { padding: 0.5rem 0 0.5rem 1.8rem !important; border-bottom: 1px solid #ebebeb; position: relative; margin-bottom: 0 !important; font-size: 16px !important; }\n  .engo-inbox-list li::before { content: \"✓\"; position: absolute; left: 0; color: #2e7d32; font-weight: 700; }\n\n  .engo-infobox { background: #fff8e6; border: 1px solid #f0d080; border-radius: 6px; padding: 1rem 1.2rem; margin-top: 1.5rem; color: #5a4a00; line-height: 1.6; font-size: 16px !important; }\n\n  @media (max-width: 600px) {\n    .engo-why-grid { grid-template-columns: 1fr; }\n    .engo-spec-table td:first-child { width: auto; }\n  }\n\u003c\/style\u003e\n\n\u003cdiv class=\"engo-desc\"\u003e\n\n  \u003cdiv class=\"engo-intro-box\"\u003e\n    \u003cp\u003e\n      \u003cspan class=\"engo-badge\"\u003eNTC 10kΩ\u003c\/span\u003e\n      \u003cspan class=\"engo-badge\"\u003e3 m Cable\u003c\/span\u003e\n      \u003cspan class=\"engo-badge\"\u003e−10°C to 100°C\u003c\/span\u003e\n      \u003cspan class=\"engo-badge green\"\u003e5-Year Warranty\u003c\/span\u003e\n    \u003c\/p\u003e\n    \u003cp style=\"margin-top: 0.7rem !important;\"\u003eThe \u003cstrong\u003eENGO EFS300\u003c\/strong\u003e is a passive NTC 10kΩ temperature sensor on a 3-metre cable, designed for installation in or on floors, pipes, cylinders, or any surface where an external temperature reading is needed. It is the standard companion sensor for the \u003cstrong\u003eENGO ONE thermostat range\u003c\/strong\u003e (EONE-230W\/B, EONE-BATW\/B), the EREL-16ZB smart relay, and several other ENGO products — enabling floor protection, \"comfortable floor\" mode, and temperature-triggered automation.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cp\u003eA dedicated floor sensor is essential in any underfloor heating system where you want to protect the floor surface from overheating — particularly important with laminate, engineered wood, or LVT flooring where temperatures above around 27–29°C can cause damage or voiding of the floor warranty. The EFS300 connects to the S1\/COM terminals found on compatible ENGO thermostats and relays, adding a second temperature reading point that the controller can use for floor limiting, pipe monitoring, or automation rules.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Choose the ENGO EFS300?\u003c\/h2\u003e\n  \u003cdiv class=\"engo-why-grid\"\u003e\n    \u003cdiv class=\"engo-why-card\"\u003e\n\u003cstrong\u003e🌡️ Floor Overheating Protection\u003c\/strong\u003eLimits the floor surface temperature to your set maximum — protecting laminate, wood, and LVT floors from heat damage while allowing the room to reach its target setpoint.\u003c\/div\u003e\n    \u003cdiv class=\"engo-why-card\"\u003e\n\u003cstrong\u003e🛁 \"Comfortable Floor\" Mode\u003c\/strong\u003eWorks with ENGO ONE thermostats to keep the floor at a minimum warmth level regardless of the room air temperature — ideal for tiled bathrooms and wet rooms.\u003c\/div\u003e\n    \u003cdiv class=\"engo-why-card\"\u003e\n\u003cstrong\u003e📏 3-Metre Cable\u003c\/strong\u003eThe generous cable length makes routing to the thermostat or wiring centre straightforward without extensions — enough for most standard room layouts.\u003c\/div\u003e\n    \u003cdiv class=\"engo-why-card\"\u003e\n\u003cstrong\u003e🔌 Plug-and-Play Compatible\u003c\/strong\u003eDesigned to connect directly to the S1\/COM sensor input on EONE series thermostats, EREL-16ZB smart relay, and other compatible ENGO products — no additional hardware needed.\u003c\/div\u003e\n    \u003cdiv class=\"engo-why-card\"\u003e\n\u003cstrong\u003e🌐 Multi-Purpose Sensing\u003c\/strong\u003eNot limited to floors — can monitor pipe temperature, cylinder temperature, ambient air in any location, or any device surface within cable reach.\u003c\/div\u003e\n    \u003cdiv class=\"engo-why-card\"\u003e\n\u003cstrong\u003e🏭 Suitable for In-Floor Installation\u003c\/strong\u003eThe sensor probe is designed for embedding in screed or under floor coverings — the cable exits cleanly to the wall chase or conduit.\u003c\/div\u003e\n    \u003cdiv class=\"engo-why-card\"\u003e\n\u003cstrong\u003e⚡ Enables Smart Automation\u003c\/strong\u003eWhen connected to the EREL-16ZB relay, the EFS300 temperature reading can trigger rules and automations in the ENGO Smart app — for example, frost protection for a hot water pipe or cylinder monitoring.\u003c\/div\u003e\n    \u003cdiv class=\"engo-why-card\"\u003e\n\u003cstrong\u003e🛡️ 5-Year Warranty\u003c\/strong\u003eBacked by ENGO's standard 5-year manufacturer's warranty.\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eSuitable For\u003c\/h2\u003e\n  \u003cdiv class=\"engo-pills\"\u003e\n    \u003cspan class=\"engo-pill\"\u003eENGO EONE-230W \/ EONE-230B\u003c\/span\u003e\n    \u003cspan class=\"engo-pill\"\u003eENGO EONE-BATW \/ EONE-BATB\u003c\/span\u003e\n    \u003cspan class=\"engo-pill\"\u003eENGO EREL-16ZB Smart Relay\u003c\/span\u003e\n    \u003cspan class=\"engo-pill\"\u003eENGO EREL-16WIFI Smart Relay\u003c\/span\u003e\n    \u003cspan class=\"engo-pill\"\u003eENGO E10-W \/ E10-B Thermostats\u003c\/span\u003e\n    \u003cspan class=\"engo-pill\"\u003eUnderfloor Heating Systems\u003c\/span\u003e\n    \u003cspan class=\"engo-pill\"\u003eLaminate \u0026amp; Wood Floor Protection\u003c\/span\u003e\n    \u003cspan class=\"engo-pill\"\u003eBathroom \u0026amp; Wet Room UFH\u003c\/span\u003e\n    \u003cspan class=\"engo-pill\"\u003ePipe Temperature Monitoring\u003c\/span\u003e\n    \u003cspan class=\"engo-pill\"\u003eHot Water Cylinder Monitoring\u003c\/span\u003e\n    \u003cspan class=\"engo-pill\"\u003eFrost Protection Applications\u003c\/span\u003e\n    \u003cspan class=\"engo-pill\"\u003eSmart Home Automation Rules\u003c\/span\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eAbout the EFS300\u003c\/h2\u003e\n  \u003cp\u003eThe EFS300 is a passive NTC (Negative Temperature Coefficient) thermistor sensor with a nominal resistance of \u003cstrong\u003e10kΩ at 25°C\u003c\/strong\u003e. It requires no power supply of its own — the resistance value changes with temperature, and the connected thermostat or relay reads this change to calculate the temperature. This is the same sensor type used across the ENGO product range, ensuring reliable, accurate readings throughout the measurement range of −10°C to 100°C.\u003c\/p\u003e\n\n  \u003cdiv class=\"engo-callout-blue\"\u003e\n    \u003cstrong\u003e🛁 \"Comfortable Floor\" Mode — How It Works\u003c\/strong\u003e\u003cbr\u003e\n    When connected to an EONE series thermostat, the EFS300 enables \u003cstrong\u003e\"Comfortable Floor\" mode\u003c\/strong\u003e: the thermostat monitors both the room air temperature (via its internal sensor) and the floor surface temperature (via the EFS300). You can set a minimum floor temperature — for example 22°C in a bathroom — so the floor stays pleasantly warm even when the room has already reached its air temperature setpoint. Simultaneously, you can set a maximum floor temperature (typically 27°C for wood, 29°C for tile) to prevent overheating and floor damage. This dual-limit control is the most intelligent way to manage UFH in rooms with sensitive floor coverings.\n  \u003c\/div\u003e\n\n  \u003cp\u003eThe 3 m cable with 2×0.5 mm² cross-section is thin enough to be embedded in floor screed or routed under skirting boards and into a wall chase. For new installations, the sensor probe should be positioned in the floor mid-way between two heating pipes, approximately 50–100 mm from the wall — this gives the most representative reading of average floor surface temperature rather than a hot-spot directly above a pipe. The cable end connects to the S1 and COM terminals on the thermostat, relay, or other compatible ENGO device.\u003c\/p\u003e\n\n  \u003cdiv class=\"engo-callout\"\u003e\n    \u003ch3\u003e✅ Compatible ENGO Products\u003c\/h3\u003e\n    \u003cp\u003eEONE-230W, EONE-230B, EONE-BATW, EONE-BATB (via S1\/COM sensor input) · EREL-16ZB and EREL-16WIFI smart relays (S1\/S2 input) · E10-W, E10-B thermostats · EFAN series fan coil thermostats (S1\/S2 pipe or floor sensor input). Always confirm compatibility in the product manual for your specific thermostat model.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eKey Features\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNTC 10kΩ thermistor\u003c\/strong\u003e — standard type compatible across the ENGO product range\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eMeasuring range: −10°C to 100°C\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e3-metre cable length\u003c\/strong\u003e — 2×0.5 mm² cross-section\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDesigned for in-floor installation\u003c\/strong\u003e — probe suitable for embedding in screed\u003c\/li\u003e\n    \u003cli\u003eAlso suitable for \u003cstrong\u003epipe, cylinder, ambient air, or surface temperature\u003c\/strong\u003e measurement\u003c\/li\u003e\n    \u003cli\u003eEnables \u003cstrong\u003efloor overheating protection\u003c\/strong\u003e in compatible thermostats\u003c\/li\u003e\n    \u003cli\u003eEnables \u003cstrong\u003e\"Comfortable Floor\" mode\u003c\/strong\u003e in ENGO ONE thermostats\u003c\/li\u003e\n    \u003cli\u003eEnables \u003cstrong\u003etemperature-triggered automation rules\u003c\/strong\u003e when connected to EREL-16ZB\u003c\/li\u003e\n    \u003cli\u003eConnects to \u003cstrong\u003eS1\/COM sensor terminals\u003c\/strong\u003e — no power supply required\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e5-year manufacturer's warranty\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003eEAN: 5905481996338\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n  \u003ctable class=\"engo-spec-table\"\u003e\n    \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eEFS300\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eSensor Type\u003c\/td\u003e\n\u003ctd\u003eNTC thermistor\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eNominal Resistance\u003c\/td\u003e\n\u003ctd\u003e10kΩ at 25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMeasuring Range\u003c\/td\u003e\n\u003ctd\u003e−10°C to 100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eCable Cross-Section\u003c\/td\u003e\n\u003ctd\u003e2×0.5 mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eS1\/COM sensor terminals on compatible ENGO devices\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eNone — passive sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eCompatible Products\u003c\/td\u003e\n\u003ctd\u003eEONE-230W\/B, EONE-BATW\/B, EREL-16ZB, EREL-16WIFI, E10-W\/B, EFAN series\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e5905481996338\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n  \u003cp\u003eFor floor installation in new screed, lay the sensor probe in a conduit or protective sleeve mid-way between two UFH pipes, approximately 50–100 mm from the nearest wall. The sleeve allows the sensor to be replaced in future without disturbing the floor. Route the cable up the wall in a chase to the thermostat or wiring centre. Connect the two wires to the S1 and COM terminals — polarity does not matter for a passive NTC sensor. Once connected, configure the thermostat's sensor input to \"Floor sensor\" in the installer settings, and set your desired floor minimum and maximum temperature limits.\u003c\/p\u003e\n\n  \u003cp\u003eFor pipe or cylinder monitoring, secure the probe to the pipe or vessel surface with tape or a clip and insulate over the top to prevent the ambient air temperature from affecting the reading. For frost protection applications, the sensor can be placed in any exposed location where you want to trigger heating if the temperature drops below a threshold.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv class=\"engo-faq-item\"\u003e\n    \u003ch3\u003eWhich ENGO thermostats work with the EFS300?\u003c\/h3\u003e\n    \u003cp\u003eThe EFS300 is compatible with the EONE-230W, EONE-230B, EONE-BATW, EONE-BATB, E10-W, E10-B, and the EFAN fan coil thermostat range. It also connects to the S1\/S2 input of the EREL-16ZB and EREL-16WIFI smart relays. Always check the wiring diagram for your specific thermostat model.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"engo-faq-item\"\u003e\n    \u003ch3\u003eDo I need the EFS300 for my UFH system?\u003c\/h3\u003e\n    \u003cp\u003eIt is not mandatory, but it is strongly recommended for any installation with laminate, engineered wood, or LVT flooring. It enables floor temperature limiting, which protects the floor covering from heat damage. It is also needed if you want to use the \"Comfortable Floor\" mode in ENGO ONE thermostats.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"engo-faq-item\"\u003e\n    \u003ch3\u003eCan I use the EFS300 to measure air temperature instead of floor temperature?\u003c\/h3\u003e\n    \u003cp\u003eYes — the EFS300 can measure the temperature of any surface, medium, or ambient air within the cable's reach. However, for measuring room air temperature, the thermostat's internal sensor is typically more accurate (positioned away from walls and draughts). The EFS300 is better suited to floor, pipe, cylinder, or surface applications.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"engo-faq-item\"\u003e\n    \u003ch3\u003eIs the 3 m cable long enough?\u003c\/h3\u003e\n    \u003cp\u003eFor most room layouts where the thermostat is positioned on an adjacent wall, 3 m is sufficient. If you need a longer run, the cable can be extended using standard 2-core cable of the same or larger cross-section — NTC sensor cables are not sensitive to moderate cable lengths, though very long runs (over 10–15 m) may introduce slight reading inaccuracy. Use screened cable if running near mains wiring.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"engo-faq-item\"\u003e\n    \u003ch3\u003eDoes the EFS300 need a power supply?\u003c\/h3\u003e\n    \u003cp\u003eNo — it is a completely passive sensor. The connected thermostat or relay provides a small reference voltage and reads the resistance of the thermistor to calculate temperature. Simply connect the two sensor wires to the S1 and COM terminals.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cul class=\"engo-inbox-list\"\u003e\n    \u003cli\u003e1× ENGO EFS300 NTC 10kΩ temperature sensor with 3 m cable\u003c\/li\u003e\n    \u003cli\u003eQuick installation guide\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cdiv class=\"engo-infobox\"\u003e\n    \u003cstrong\u003e⚠️ Please Note:\u003c\/strong\u003e The EFS300 must be used with a compatible ENGO thermostat or relay that has an NTC sensor input (S1\/COM terminals). It is not a standalone device and will not function without a compatible host product. For floor installation, a protective conduit sleeve is recommended to allow future replacement of the sensor without disturbing the floor covering. Always follow the floor manufacturer's maximum temperature recommendations when setting floor temperature limits.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"ENGO Controls","offers":[{"title":"Default Title","offer_id":63496814821725,"sku":"EFS300","price":9.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/2051\/3629\/files\/ENGOEFS300.webp?v=1771507251","url":"https:\/\/qualityheating.co.uk\/products\/engo-efs300-temperature-sensor-ntc-10kohm","provider":"AIZO Quality Heating","version":"1.0","type":"link"}