{"title":"Condensate Pro","description":"","products":[{"product_id":"condensate-pro-1-metre-combo-kit-2-complete-external-condensate-pipe-insulation-kit","title":"Condensate Pro 1 Metre Combo Kit 2 – Complete External Condensate Pipe Insulation Kit","description":"\u003cdiv style=\"font-family: Arial, sans-serif; color: #333; max-width: 900px; line-height: 1.6;\"\u003e\n\n  \u003cdiv style=\"border-left: 5px solid #008377; padding: 12px 18px; background-color: #f0faf9; margin-bottom: 24px;\"\u003e\n    \u003cp style=\"margin: 0; font-size: 15px; color: #008377; font-weight: bold;\"\u003eCondensate Pro | Item Code: CPCOMBOKIT2 | MPN: IG011\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cp style=\"font-size: 15px;\"\u003e\n    The Condensate Pro 1M Combo Kit 2 (IG011) is a complete, all-in-one external condensate pipe installation kit for boilers with a minimum condensate pipe diameter of 30mm. Everything needed to insulate, connect and secure a 1-metre external condensate pipe run is included, making this the ideal solution for typical residential boiler condensate upgrades. Meets current regulations for external condensate discharge pipes.\n  \u003c\/p\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eKit Contents\u003c\/h2\u003e\n  \u003cul style=\"padding-left: 20px; font-size: 15px;\"\u003e\n    \u003cli\u003e1 x 1m length of Condensate Pro insulation (fits 32mm solvent weld pipe)\u003c\/li\u003e\n    \u003cli\u003e1 x Pre-made angled wall connection (fits 32mm solvent weld pipe)\u003c\/li\u003e\n    \u003cli\u003e2 x 50mm pipe clips\u003c\/li\u003e\n    \u003cli\u003e1 x Spacer bar\u003c\/li\u003e\n    \u003cli\u003e1 x 150g tube of Bond \u0026amp; Seal (mastic gun tube)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eKey Features\u003c\/h2\u003e\n  \u003cul style=\"padding-left: 20px; font-size: 15px;\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eComplete kit\u003c\/strong\u003e – all components required for a standard 1-metre external condensate pipe installation are included in a single pack.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMeets current regulations\u003c\/strong\u003e – designed to comply with requirements for condensate discharge waste pipe protection.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFast installation\u003c\/strong\u003e – pre-made insulated connection and ready-to-use components keep installation time to around 20 minutes.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeatherproof insulation\u003c\/strong\u003e – UV-stable, weather-resistant coating on the insulation provides long-term outdoor durability.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBond \u0026amp; Seal included\u003c\/strong\u003e – 150g hybrid polymer sealant is supplied to join and seal all connections, leaving no vulnerable gaps.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNo wet trades needed\u003c\/strong\u003e – the pre-made connection eliminates the need for solvent welding on-site.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eProduct Specifications\u003c\/h2\u003e\n  \u003ctable style=\"width: 100%; border-collapse: collapse; font-size: 14px;\"\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; width: 40%; border: 1px solid #c8e6e3; color: #008377;\"\u003ePipe Compatibility\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e32mm solvent weld pipe (min. 30mm condensate pipe)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eInsulation Length\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e1 metre\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eBond \u0026amp; Seal Included\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eYes – 150g mastic gun tube\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eColour\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eBlack\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eCore Hole Required\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e65mm\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eMPN\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eIG011\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eBrand\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eCondensate Pro\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px; margin-top: 28px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eDoes this kit include everything I need for a standard installation?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eYes, the Combo Kit 2 contains all components for a complete 1-metre condensate pipe installation including insulation, the wall connection, clips, spacer bar and Bond \u0026amp; Seal sealant. A Termination Kit (CPTERMKIT) is available separately if needed.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eWhat size core hole is needed in the wall?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eA 65mm core hole is required to fit the PipeSnug wall connection included in the kit. The Condensate Pro Drift Kit (CPDRIFT) can be used to enlarge an existing hole if upgrading an older installation.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eCan I use this kit on a new build as well as a retrofit?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eYes, the Combo Kit 2 is suitable for both new installations and retrofitting to existing condensate pipe runs.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"background-color: #008377; color: #fff; padding: 14px 18px; border-radius: 4px; margin-top: 28px; font-size: 14px;\"\u003e\n    \u003cstrong\u003eRelated Products:\u003c\/strong\u003e Condensate Pro Termination Kit (CPTERMKIT) | Condensate Pro Pipe Insulation (CPINS) | Condensate Pro Drift Kit (CPDRIFT) | Condensate Pro Bond \u0026amp; Seal (CPBS)\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Condensate Pro","offers":[{"title":"Default Title","offer_id":63824242639197,"sku":"CPCOMBOKIT2","price":37.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/2051\/3629\/files\/CondensatePro1MComboKit2cpcombokit2.webp?v=1773335995"},{"product_id":"condensate-pro-connection-kit-2-pre-insulated-wall-connection-for-external-condensate-pipes","title":"Condensate Pro Connection Kit 2 – Pre-Insulated Wall Connection for External Condensate Pipes","description":"\u003c!-- SEO Product Name: Condensate Pro Connection Kit 2 – Pre-Insulated Wall Connection for External Condensate Pipes (IG010) --\u003e\n\n\u003cdiv style=\"font-family: Arial, sans-serif; color: #333; max-width: 900px; line-height: 1.6;\"\u003e\n\n  \u003cdiv style=\"border-left: 5px solid #008377; padding: 12px 18px; background-color: #f0faf9; margin-bottom: 24px;\"\u003e\n    \u003cp style=\"margin: 0; font-size: 15px; color: #008377; font-weight: bold;\"\u003eCondensate Pro | Item Code: CPCONKIT2 | MPN: IG010\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cp style=\"font-size: 15px;\"\u003e\n    The Condensate Pro Connection Kit 2 (IG010) provides everything needed to connect and insulate the point where a condensate pipe passes through an external wall. The pre-made insulated connection eliminates the need for wet trades on-site, and the complete kit allows a professional, fully protected installation in under 30 minutes. Designed to work seamlessly with the Condensate Pro insulation and Termination Kit for a continuous freeze-resistant system.\n  \u003c\/p\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eKit Contents\u003c\/h2\u003e\n  \u003cul style=\"padding-left: 20px; font-size: 15px;\"\u003e\n    \u003cli\u003e1 x Pre-insulated wall connection (fits 32mm solvent weld pipe)\u003c\/li\u003e\n    \u003cli\u003e1 x 150g mastic gun tube of Bond \u0026amp; Seal\u003c\/li\u003e\n    \u003cli\u003e1 x Spacer bar\u003c\/li\u003e\n    \u003cli\u003e1 x 50mm pipe clip\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eKey Features\u003c\/h2\u003e\n  \u003cul style=\"padding-left: 20px; font-size: 15px;\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePre-made connection\u003c\/strong\u003e – arrives ready to use; no wet trades or solvent welding required on-site.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFast installation\u003c\/strong\u003e – complete condensate wall connection in under 30 minutes.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAll-inclusive\u003c\/strong\u003e – contains the connection, Bond \u0026amp; Seal sealant, clip and spacer bar – everything is in the box.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFreeze protection\u003c\/strong\u003e – insulated from wall exit to pipe run, with no exposed section left vulnerable to cold.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProfessional finish\u003c\/strong\u003e – black insulated connection blends with the Condensate Pro system for a uniform appearance.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eProduct Specifications\u003c\/h2\u003e\n  \u003ctable style=\"width: 100%; border-collapse: collapse; font-size: 14px;\"\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; width: 40%; border: 1px solid #c8e6e3; color: #008377;\"\u003ePipe Compatibility\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e32mm solvent weld pipe\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eBond \u0026amp; Seal Included\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eYes – 150g mastic gun tube\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eCore Hole Required\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e65mm\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eInstallation Time\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eUnder 30 minutes\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eColour\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eBlack\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eMPN\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eIG010\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eBrand\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eCondensate Pro\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px; margin-top: 28px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eDoes the Connection Kit include insulation pipe lengths?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eNo. The Connection Kit covers the wall connection point only. For a complete kit including 1m of insulation, choose the Combo Kit 2 (CPCOMBOKIT2). Additional pipe insulation is available separately (CPINS).\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eWhat core hole size is needed?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eA 65mm core hole is required. If upgrading an existing installation with a smaller hole, the Condensate Pro Drift Kit (CPDRIFT) can be used to enlarge it.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eCan the Grinder Head be used alongside this kit on stone walls?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eYes. On irregular or uneven stone surfaces, the Condensate Pro Grinder Head (CPGRIND) should be used first to create a flat face for the PipeSnug to seal against.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"background-color: #008377; color: #fff; padding: 14px 18px; border-radius: 4px; margin-top: 28px; font-size: 14px;\"\u003e\n    \u003cstrong\u003eRelated Products:\u003c\/strong\u003e Condensate Pro Combo Kit 2 (CPCOMBOKIT2) | Condensate Pro Pipe Insulation (CPINS) | Condensate Pro Termination Kit (CPTERMKIT) | Condensate Pro Drift Kit (CPDRIFT) | Condensate Pro Grinder Head (CPGRIND)\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Condensate Pro","offers":[{"title":"Default Title","offer_id":63824394453341,"sku":"CPCONKIT2","price":27.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/2051\/3629\/files\/cpconkit2CondensateProConnectionKit2.webp?v=1773336206"},{"product_id":"condensate-pro-external-pipe-insulation-35mm-x-13mm-pack-of-3-x-1m-lengths","title":"Condensate Pro External Pipe Insulation 35mm x 13mm – Pack of 3 x 1m Lengths","description":"\u003cdiv style=\"font-family: Arial, sans-serif; color: #333; max-width: 900px; line-height: 1.6;\"\u003e\n\n  \u003cdiv style=\"border-left: 5px solid #008377; padding: 12px 18px; background-color: #f0faf9; margin-bottom: 24px;\"\u003e\n    \u003cp style=\"margin: 0; font-size: 15px; color: #008377; font-weight: bold;\"\u003eCondensate Pro | Item Code: CPINS | MPN: IG001\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cp style=\"font-size: 15px;\"\u003e\n    The Condensate Pro Pipe Insulation (IG001) is purpose-built external condensate pipe insulation, designed to prevent frozen pipes and protect boilers during even the harshest winter conditions. Supplied as a pack of three 1-metre semi-rigid lengths, it fits standard 32mm solvent weld condensate pipe and delivers a professional, weatherproof finish in around 20 minutes.\n  \u003c\/p\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eKey Features\u003c\/h2\u003e\n  \u003cul style=\"padding-left: 20px; font-size: 15px;\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFreeze protection\u003c\/strong\u003e – fits 32mm solvent weld pipe, shielding external condensate pipework from freezing and preventing costly boiler breakdowns.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUV-stable \u0026amp; weather-resistant\u003c\/strong\u003e – each 1m length features a unique protective coating that maintains integrity through year-round exposure to the elements.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQuick installation\u003c\/strong\u003e – precision-engineered for effortless cutting, mitreing and bonding; complete installs typically take around 20 minutes.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStandards compliant\u003c\/strong\u003e – complies with boiler manufacturer instructions and BS 6798, suitable for new-build and retrofit applications.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProfessional finish\u003c\/strong\u003e – for a fully sealed, watertight result, use with Condensate Pro Bond \u0026amp; Seal (sold separately).\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eProduct Specifications\u003c\/h2\u003e\n  \u003ctable style=\"width: 100%; border-collapse: collapse; font-size: 14px;\"\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; width: 40%; border: 1px solid #c8e6e3; color: #008377;\"\u003ePipe Diameter\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e35mm (fits 32mm solvent weld pipe)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eWall Thickness\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e13mm\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003ePack Contents\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e3 x 1m lengths\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eCoating\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eUV-stable, weather-resistant\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eColour\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eBlack\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eApplication\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eExternal condensate pipe protection\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eStandards\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eCompliant with BS 6798 \u0026amp; boiler manufacturer guidelines\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eMPN\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eIG001\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eBrand\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eCondensate Pro\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px; margin-top: 28px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eWhat pipe size does this insulation fit?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eIt fits standard 32mm solvent weld condensate pipe, which is the most common size used on residential and light commercial boilers in the UK.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eIs it suitable for outdoor use?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eYes. Each length features a UV-stable and weather-resistant coating, making it fully suitable for permanent external installation in the UK climate.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eHow long does installation take?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eMost installers complete a standard external condensate insulation job in approximately 20 minutes using the Condensate Pro system.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eCan I use this insulation on a retrofit installation?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eYes, the insulation is suitable for both new installations and retrofitting to existing external condensate pipework.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"background-color: #008377; color: #fff; padding: 14px 18px; border-radius: 4px; margin-top: 28px; font-size: 14px;\"\u003e\n    \u003cstrong\u003eRelated Products:\u003c\/strong\u003e Condensate Pro Bond \u0026amp; Seal (CPBS) | Condensate Pro Connection Kit 2 (CPCONKIT2) | Condensate Pro Combo Kit 2 (CPCOMBOKIT2) | Condensate Pro Termination Kit (CPTERMKIT)\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Condensate Pro","offers":[{"title":"Default Title","offer_id":63824449700189,"sku":"IG001","price":29.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/2051\/3629\/files\/IG001CondensatePro3x1MLength35mmx13mmPipeInsulation.png?v=1773336479"},{"product_id":"condensate-pro-pre-insulated-termination-kit-for-external-condensate-pipes","title":"Condensate Pro Pre-Insulated Termination Kit for External Condensate Pipes","description":"\u003c!-- SEO Product Name: Condensate Pro Pre-Insulated Termination Kit for External Condensate Pipes (IG003) --\u003e\n\n\u003cdiv style=\"font-family: Arial, sans-serif; color: #333; max-width: 900px; line-height: 1.6;\"\u003e\n\n  \u003cdiv style=\"border-left: 5px solid #008377; padding: 12px 18px; background-color: #f0faf9; margin-bottom: 24px;\"\u003e\n    \u003cp style=\"margin: 0; font-size: 15px; color: #008377; font-weight: bold;\"\u003eCondensate Pro | Item Code: CPTERMKIT | MPN: IG003\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cp style=\"font-size: 15px;\"\u003e\n    The Condensate Pro Termination Kit (IG003) provides a professional, ready-to-use solution for completing the end of an external condensate pipe installation. The 32mm solvent weld pipe termination arrives pre-made and insulated straight out of the box, saving time on-site while delivering a neat, fully protected finish. The internal joint remains adjustable so it can be connected at any angle – whether the pipe terminates into a soil pipe, rainwater pipe, soakaway or drain.\n  \u003c\/p\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eKit Contents\u003c\/h2\u003e\n  \u003cul style=\"padding-left: 20px; font-size: 15px;\"\u003e\n    \u003cli\u003e1 x Pre-insulated adjustable termination (fits 32mm solvent weld pipe)\u003c\/li\u003e\n    \u003cli\u003e1 x 50mm pipe clip\u003c\/li\u003e\n    \u003cli\u003e1 x Spacer bar\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eKey Features\u003c\/h2\u003e\n  \u003cul style=\"padding-left: 20px; font-size: 15px;\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePre-made \u0026amp; ready to install\u003c\/strong\u003e – arrives fully assembled for a fast, hassle-free fitting on site.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAdjustable angle\u003c\/strong\u003e – the unglued internal joint allows connection at any angle to suit soil pipes, rainwater pipes, soakaways or drains.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eComplete freeze protection\u003c\/strong\u003e – insulated termination prevents the vulnerable end of the condensate pipe from freezing in cold weather.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProfessional appearance\u003c\/strong\u003e – designed to match the Condensate Pro insulation system for a clean, consistent finish along the full run of the pipe.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUniversal compatibility\u003c\/strong\u003e – works seamlessly with the Condensate Pro Connection Kit 2 and insulation for a complete end-to-end solution.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eProduct Specifications\u003c\/h2\u003e\n  \u003ctable style=\"width: 100%; border-collapse: collapse; font-size: 14px;\"\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; width: 40%; border: 1px solid #c8e6e3; color: #008377;\"\u003ePipe Compatibility\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e32mm solvent weld pipe\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eTermination Type\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003ePre-insulated, adjustable angle\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eColour\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eBlack\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eDischarge Options\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eSoil pipe, rainwater pipe, soakaway, drain\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eMPN\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eIG003\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eBrand\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eCondensate Pro\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px; margin-top: 28px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eDoes the termination need to be glued in place?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eNo. The internal joint is left unglued so it can be adjusted to connect at any required angle before being sealed with Condensate Pro Bond \u0026amp; Seal.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eWhat can the termination connect to?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eIt can terminate into a soil pipe, rainwater pipe, soakaway or suitable drain, making it highly versatile across different property types.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eIs the termination kit sold with Bond \u0026amp; Seal?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eNo, Bond \u0026amp; Seal is sold separately (CPBS). For a full kit including Bond \u0026amp; Seal, consider the Condensate Pro Combo Kit 2 (CPCOMBOKIT2).\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"background-color: #008377; color: #fff; padding: 14px 18px; border-radius: 4px; margin-top: 28px; font-size: 14px;\"\u003e\n    \u003cstrong\u003eRelated Products:\u003c\/strong\u003e Condensate Pro Bond \u0026amp; Seal (CPBS) | Condensate Pro Connection Kit 2 (CPCONKIT2) | Condensate Pro Combo Kit 2 (CPCOMBOKIT2) | Condensate Pro Pipe Insulation (CPINS)\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Condensate Pro","offers":[{"title":"Default Title","offer_id":63824546693469,"sku":"IG003","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/2051\/3629\/files\/IG003CondensateProTerminationKitcwInsulated_AdjustableTermination_50mmClip_Spacer.webp?v=1773337079"},{"product_id":"condensate-pro-drift-kit-condensate-pipe-upgrade-tool-set-with-21-5mm-32mm-40mm-drift-heads","title":"Condensate Pro Drift Kit – Condensate Pipe Upgrade Tool Set with 21.5mm, 32mm \u0026 40mm Drift Heads","description":"\u003cdiv style=\"font-family: Arial, sans-serif; color: #333; max-width: 900px; line-height: 1.6;\"\u003e\n\n  \u003cdiv style=\"border-left: 5px solid #008377; padding: 12px 18px; background-color: #f0faf9; margin-bottom: 24px;\"\u003e\n    \u003cp style=\"margin: 0; font-size: 15px; color: #008377; font-weight: bold;\"\u003eCondensate Pro | Item Code: CPDRIFT | MPN: IG006\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cp style=\"font-size: 15px;\"\u003e\n    The Condensate Pro Drift Kit (IG006) is a professional-grade tool set designed to make condensate pipe upgrades straightforward and time-efficient. Millions of boilers in UK properties have substandard external condensate pipe protection, often fitted with small overflow or waste pipes with little or no insulation. This drift kit allows installers to quickly enlarge an existing wall hole to the correct size for a Condensate Pro kit, without the difficulty of drilling blind or off-centre. With three drift head sizes covering the most common pipe diameters, it handles the full range of typical upgrade scenarios.\n  \u003c\/p\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eKit Contents\u003c\/h2\u003e\n  \u003cul style=\"padding-left: 20px; font-size: 15px;\"\u003e\n    \u003cli\u003e1 x Drift bar\u003c\/li\u003e\n    \u003cli\u003e1 x Hex drive bolt\u003c\/li\u003e\n    \u003cli\u003e1 x Overflow pipe drift head – 21.5mm\u003c\/li\u003e\n    \u003cli\u003e1 x Solvent weld pipe drift head – 32mm\u003c\/li\u003e\n    \u003cli\u003e1 x Solvent weld pipe drift head – 40mm\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eKey Features\u003c\/h2\u003e\n  \u003cul style=\"padding-left: 20px; font-size: 15px;\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThree pipe sizes covered\u003c\/strong\u003e – drift heads for 21.5mm overflow pipes, 32mm and 40mm solvent weld waste pipes cover the most common condensate pipe sizes.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGuides the diamond core drill\u003c\/strong\u003e – the drift head fits into the existing pipe and centres the core drill, making it simple to drill a clean, precise hole to the required size (65mm for Condensate Pro kits).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWorks with any diamond core drill\u003c\/strong\u003e – the drift bar is compatible with standard diamond core drills of any size.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDurable \u0026amp; reusable\u003c\/strong\u003e – the kit is built to last; simply clean and oil after use to maintain it in good working order.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompliant installations\u003c\/strong\u003e – helps achieve professional, standard-compliant upgrades every time.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eProduct Specifications\u003c\/h2\u003e\n  \u003ctable style=\"width: 100%; border-collapse: collapse; font-size: 14px;\"\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; width: 40%; border: 1px solid #c8e6e3; color: #008377;\"\u003eDrift Head Sizes\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e21.5mm, 32mm, 40mm\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eTarget Core Hole\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e65mm (for Condensate Pro Connection \/ Combo Kit 2)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eDrive Type\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eFits any diamond core drill\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eApplication\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eEnlarging existing condensate pipe wall holes for upgrade\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eMPN\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eIG006\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eBrand\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eCondensate Pro\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px; margin-top: 28px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eWhy do I need a drift kit to upgrade a condensate pipe?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eWhen upgrading a condensate pipe to accept a Condensate Pro Connection Kit or Combo Kit, a 65mm core hole is required. Without the drift kit, it is very difficult to drill centrally through an existing pipe hole. The drift head slides into the existing pipe and guides the core drill so the new hole is perfectly centred and correctly sized every time.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eDoes the kit work on overflow pipes as well as waste pipes?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eYes. The 21.5mm drift head is specifically for 21.5mm overflow pipes, while the 32mm and 40mm heads cover standard solvent weld waste pipes.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eShould I also purchase the Grinder Head?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eIf you are working on properties with uneven or irregular stonework, the Condensate Pro Grinder Head (CPGRIND) is recommended alongside the Drift Kit to create a flat surface for the PipeSnug to seal against. Contact Condensate Pro after purchasing both – a free extension bar is available when the Drift Kit and Grinder Head are bought together.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"background-color: #008377; color: #fff; padding: 14px 18px; border-radius: 4px; margin-top: 28px; font-size: 14px;\"\u003e\n    \u003cstrong\u003eRelated Products:\u003c\/strong\u003e Condensate Pro Grinder Head (CPGRIND) | Condensate Pro Connection Kit 2 (CPCONKIT2) | Condensate Pro Combo Kit 2 (CPCOMBOKIT2) | Condensate Pro Pipe Insulation (CPINS)\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Condensate Pro","offers":[{"title":"Default Title","offer_id":63824760013149,"sku":"IG006","price":55.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/2051\/3629\/files\/CondensateProDriftkitwithDriftBar_HexBolt_21.5_32_40mmdriftheads_dbe1a64e-00e0-4b8c-bb84-e180a9e74353.webp?v=1773337295"},{"product_id":"condensate-pro-bond-seal-hybrid-polymer-sealant-150g-black-mastic-tube","title":"Condensate Pro Bond \u0026 Seal Hybrid Polymer Sealant 150g – Black Mastic Tube","description":"\u003c!-- SEO Product Name: Condensate Pro Bond \u0026 Seal Hybrid Polymer Sealant 150g – Black Mastic Tube (IG009) --\u003e\n\n\u003cdiv style=\"font-family: Arial, sans-serif; color: #333; max-width: 900px; line-height: 1.6;\"\u003e\n\n  \u003cdiv style=\"border-left: 5px solid #008377; padding: 12px 18px; background-color: #f0faf9; margin-bottom: 24px;\"\u003e\n    \u003cp style=\"margin: 0; font-size: 15px; color: #008377; font-weight: bold;\"\u003eCondensate Pro | Item Code: CPBS | MPN: IG009\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cp style=\"font-size: 15px;\"\u003e\n    Condensate Pro Bond \u0026amp; Seal is a specially formulated hybrid polymer sealant designed to professionally bond and seal Condensate Pro and Primary Pro pipe insulation. Supplied in a 150g mastic gun tube, it bonds insulation joints, seals wall penetrations and fills any gaps in the building fabric, creating a continuous, freeze-resistant barrier along the entire condensate pipe run. The deep black colour integrates seamlessly with Condensate Pro insulation and kits for a consistent, professional finish.\n  \u003c\/p\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eKey Features\u003c\/h2\u003e\n  \u003cul style=\"padding-left: 20px; font-size: 15px;\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHybrid polymer formula\u003c\/strong\u003e – bonds and seals insulation joints, leaving no gaps vulnerable to moisture or freezing.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMastic gun tube\u003c\/strong\u003e – the 150g tube fits standard mastic guns for precise, controlled application with minimal waste.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFlexible when cured\u003c\/strong\u003e – remains flexible in extreme heat and cold, allowing the system to expand and contract with temperature changes without cracking.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEasy to dismantle\u003c\/strong\u003e – cured sealant allows the insulation to be removed without damage to the pipework when servicing is required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeatherproof seal\u003c\/strong\u003e – creates a durable barrier against rain, moisture and snow at all joints and wall penetrations.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompliant\u003c\/strong\u003e – meets Building Regulations Part L and all relevant BS installation standards.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompatible\u003c\/strong\u003e – suitable for use with all Condensate Pro and Primary Pro insulation products.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eProduct Specifications\u003c\/h2\u003e\n  \u003ctable style=\"width: 100%; border-collapse: collapse; font-size: 14px;\"\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; width: 40%; border: 1px solid #c8e6e3; color: #008377;\"\u003eType\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eHybrid polymer sealant\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eVolume\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e150g\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003ePackaging\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eMastic gun tube\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eColour\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eBlack\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eCompliance\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eBuilding Regulations Part L; BS installation standards\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eApplication\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eInsulation joints, wall penetrations, building fabric gaps\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eSuitable For\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eCondensate Pro \u0026amp; Primary Pro insulation systems\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eMPN\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eIG009\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eBrand\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eCondensate Pro\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px; margin-top: 28px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eDo I need a mastic gun to use this product?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eYes. The 150g tube is designed for use with a standard mastic gun, which gives you precise control over application and helps avoid waste.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eCan Bond \u0026amp; Seal be used on Primary Pro insulation as well?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eYes, it is fully compatible with both the Condensate Pro and Primary Pro insulation ranges.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eWhat happens to the sealant in freezing temperatures?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eOnce cured, Bond \u0026amp; Seal remains flexible in both extreme heat and extreme cold, contracting and expanding with temperature changes to maintain a continuous, weatherproof seal.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eIs Bond \u0026amp; Seal included in any Condensate Pro kits?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eYes. A 150g tube of Bond \u0026amp; Seal is included in both the Condensate Pro Connection Kit 2 (CPCONKIT2) and the Combo Kit 2 (CPCOMBOKIT2). It is also sold individually for top-ups and maintenance.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"background-color: #008377; color: #fff; padding: 14px 18px; border-radius: 4px; margin-top: 28px; font-size: 14px;\"\u003e\n    \u003cstrong\u003eRelated Products:\u003c\/strong\u003e Condensate Pro Pipe Insulation (CPINS) | Condensate Pro Connection Kit 2 (CPCONKIT2) | Condensate Pro Combo Kit 2 (CPCOMBOKIT2) | Condensate Pro Maintenance Coat 250ml (CPMC)\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Condensate Pro","offers":[{"title":"Default Title","offer_id":63824859693405,"sku":"IG009","price":13.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/2051\/3629\/files\/CondensateProBond_Seal150gPolymerSealant_BlackIG009.webp?v=1773337637"},{"product_id":"condensate-pro-76mm-grinder-head-wall-preparation-tool-for-condensate-pipe-installation","title":"Condensate Pro 76mm Grinder Head – Wall Preparation Tool for Condensate Pipe Installation","description":"\u003c!-- SEO Product Name: Condensate Pro 76mm Grinder Head – Wall Preparation Tool for Condensate Pipe Installations (IG007) --\u003e\n\n\u003cdiv style=\"font-family: Arial, sans-serif; color: #333; max-width: 900px; line-height: 1.6;\"\u003e\n\n  \u003cdiv style=\"border-left: 5px solid #008377; padding: 12px 18px; background-color: #f0faf9; margin-bottom: 24px;\"\u003e\n    \u003cp style=\"margin: 0; font-size: 15px; color: #008377; font-weight: bold;\"\u003eCondensate Pro | Item Code: CPGRIND | MPN: IG007\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cp style=\"font-size: 15px;\"\u003e\n    The Condensate Pro Grinder Head (IG007) is a 76mm specialist tool designed to quickly grind a flat, 3-inch face on uneven or irregular surfaces – such as rough stonework – where a condensate pipe exits a building. On uneven masonry, the PipeSnug wall fitting included in the Condensate Pro Connection Kit cannot form a tight seal without a flat contact surface. This grinder head solves that problem in seconds, ensuring a clean, secure seal and a professional installation result even on the most challenging wall surfaces.\n  \u003c\/p\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eKey Features\u003c\/h2\u003e\n  \u003cul style=\"padding-left: 20px; font-size: 15px;\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e76mm diameter\u003c\/strong\u003e – grinds a precise 3-inch flat face, perfectly sized for the PipeSnug in Condensate Pro connection and combo kits.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBuilt for uneven surfaces\u003c\/strong\u003e – specifically designed for hard and irregular stonework that prevents a flush seal with standard fittings.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSaves time on-site\u003c\/strong\u003e – creates the required flat surface quickly, without chasing or chiselling by hand.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eImproves seal quality\u003c\/strong\u003e – a properly prepared surface ensures better adhesion with Bond \u0026amp; Seal and a more durable, weatherproof result.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompatible with the Drift Kit\u003c\/strong\u003e – the Grinder Head can be combined with the Condensate Pro Drift Kit (CPDRIFT) via an extension bar for a complete preparation workflow. A free extension bar is available when both tools are purchased from Condensate Pro.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eProduct Specifications\u003c\/h2\u003e\n  \u003ctable style=\"width: 100%; border-collapse: collapse; font-size: 14px;\"\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; width: 40%; border: 1px solid #c8e6e3; color: #008377;\"\u003eDiameter\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e76mm (3 inch)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eApplication\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eGrinding flat face on uneven\/irregular masonry for condensate pipe wall sealing\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eSurface Types\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eStone, brick, uneven masonry\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eCompatible With\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eCondensate Pro Drift Kit via extension bar\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eMPN\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eIG007\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eBrand\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eCondensate Pro\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px; margin-top: 28px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eDo I need the Grinder Head for every installation?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eNo. The Grinder Head is specifically for properties with uneven or irregular external wall surfaces – most commonly older properties with stonework. On flat brick or rendered walls it is not required.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eHow does the Grinder Head attach to a drill?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eThe Grinder Head can be used standalone in an angle grinder. It can also be combined with the Condensate Pro Drift Kit bar using a free extension bar, available from Condensate Pro when both tools are purchased together.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eWhat sealant should be used after grinding?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eOnce the surface is ground flat, use Condensate Pro Bond \u0026amp; Seal (CPBS) to create a gasket seal between the PipeSnug and the wall, ensuring a watertight, weatherproof finish.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"background-color: #008377; color: #fff; padding: 14px 18px; border-radius: 4px; margin-top: 28px; font-size: 14px;\"\u003e\n    \u003cstrong\u003eRelated Products:\u003c\/strong\u003e Condensate Pro Drift Kit (CPDRIFT) | Condensate Pro Bond \u0026amp; Seal (CPBS) | Condensate Pro Connection Kit 2 (CPCONKIT2) | Condensate Pro Combo Kit 2 (CPCOMBOKIT2)\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Condensate Pro","offers":[{"title":"Default Title","offer_id":63824978805085,"sku":"IG007","price":97.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/2051\/3629\/files\/CondensateProGrinderHeadCutterheadforunevenwallsurfaces.png?v=1773337958"},{"product_id":"condensate-pro-maintenance-coat-250ml-water-based-uv-protective-coating-for-condensate-primary-pro-insulation","title":"Condensate Pro Maintenance Coat 250ml – Water-Based UV Protective Coating for Condensate \u0026 Primary Pro Insulation","description":"\u003cdiv style=\"font-family: Arial, sans-serif; color: #333; max-width: 900px; line-height: 1.6;\"\u003e\n\n  \u003cdiv style=\"border-left: 5px solid #008377; padding: 12px 18px; background-color: #f0faf9; margin-bottom: 24px;\"\u003e\n    \u003cp style=\"margin: 0; font-size: 15px; color: #008377; font-weight: bold;\"\u003eCondensate Pro | Item Code: CPMC | MPN: IG005\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cp style=\"font-size: 15px;\"\u003e\n    Condensate Pro Maintenance Coat (IG005) is a water-based protective coating formulated to maintain and extend the life of Condensate Pro and Primary Pro pipe insulation. Supplied in a convenient 250ml tin, it replenishes the UV-resistant and weatherproof coating on the insulation surface, keeping it fully protected against outdoor exposure throughout the life of the boiler or heat pump. Ideal for use at annual service visits or whenever the surface coating shows signs of wear.\n  \u003c\/p\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eKey Features\u003c\/h2\u003e\n  \u003cul style=\"padding-left: 20px; font-size: 15px;\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUV \u0026amp; weather protection\u003c\/strong\u003e – restores the protective coating on insulation to maintain its outdoor durability and UV resistance.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWater-based formula\u003c\/strong\u003e – easy to apply with a brush and simple to clean up with water; no solvents required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCan be applied over Bond \u0026amp; Seal\u003c\/strong\u003e – the coat can be applied directly over cured Condensate Pro Bond \u0026amp; Seal for comprehensive surface protection.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSuitable for maintenance \u0026amp; touch-ups\u003c\/strong\u003e – ideal for covering areas disturbed by brick dust during installation, or for periodic recoating during annual service checks.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWorks on both systems\u003c\/strong\u003e – compatible with Condensate Pro and Primary Pro insulation.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompliant\u003c\/strong\u003e – meets BS installation standards for condensate pipe insulation maintenance.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px;\"\u003eProduct Specifications\u003c\/h2\u003e\n  \u003ctable style=\"width: 100%; border-collapse: collapse; font-size: 14px;\"\u003e\n    \u003ctbody\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; width: 40%; border: 1px solid #c8e6e3; color: #008377;\"\u003eVolume\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003e250ml\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003ePackaging\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eTin\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eFormula\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eWater-based\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eApplication Method\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eBrush (brush cleans with water)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eSuitable For\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eCondensate Pro \u0026amp; Primary Pro insulation; application over Bond \u0026amp; Seal\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eColour\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eBlack\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr style=\"background-color: #f0faf9;\"\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eMPN\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eIG005\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 8px 12px; font-weight: bold; border: 1px solid #c8e6e3; color: #008377;\"\u003eBrand\u003c\/td\u003e\n        \u003ctd style=\"padding: 8px 12px; border: 1px solid #c8e6e3;\"\u003eCondensate Pro\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2 style=\"color: #008377; border-bottom: 2px solid #008377; padding-bottom: 6px; font-size: 17px; margin-top: 28px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eWhen should I use Maintenance Coat?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eMaintenance Coat should be applied during annual boiler or heat pump service visits to check and refresh the insulation surface. It is also useful for touching up areas disturbed during installation, such as sections coated in brick dust or where the surface has been cut or mitered.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eCan I apply it over Bond \u0026amp; Seal?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eYes. Maintenance Coat can be applied directly over fully cured Bond \u0026amp; Seal for an extra layer of protection across the full pipe installation.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eIs the 250ml tin enough for a standard installation?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eYes, the 250ml tin is well-suited to maintenance of a standard residential condensate pipe run. A 1-litre tin (not stocked here) is also available from Condensate Pro for larger or commercial applications.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"margin-bottom: 12px;\"\u003e\n    \u003cp style=\"font-weight: bold; color: #008377; margin-bottom: 4px;\"\u003eHow do I clean the brush after use?\u003c\/p\u003e\n    \u003cp style=\"margin: 0; font-size: 14px;\"\u003eBecause it is water-based, brushes can be cleaned simply with water after application – no solvents needed.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"background-color: #008377; color: #fff; padding: 14px 18px; border-radius: 4px; margin-top: 28px; font-size: 14px;\"\u003e\n    \u003cstrong\u003eRelated Products:\u003c\/strong\u003e Condensate Pro Bond \u0026amp; Seal (CPBS) | Condensate Pro Pipe Insulation (CPINS) | Condensate Pro Connection Kit 2 (CPCONKIT2) | Condensate Pro Combo Kit 2 (CPCOMBOKIT2)\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Condensate Pro","offers":[{"title":"Default Title","offer_id":63825072619869,"sku":"IG005","price":17.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/2051\/3629\/files\/CondensateProMaintenanceCoat250ml.webp?v=1773338504"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/2051\/3629\/collections\/Condensate_Pro.png?v=1777963862","url":"https:\/\/qualityheating.co.uk\/collections\/condensate-pro.oembed","provider":"AIZO Quality Heating","version":"1.0","type":"link"}